" From: "Mark Price" <mprice@xxxxxxxxxx> " " If it's what I'm thinking it is. Use a nut and a ring end and forget the push on connector. " It should be threaded stud. 10/32? it is threaded. i'll probably have to go that way, but i hate to think of the nut rusting in place. " ---------- Original Message ---------------------------------- " From: adh@xxxxxxxxxxxxxxxxx (Sandwich Maker) " " >i go to pull the black [ground] off the alt and the wire snaps at the " >connector! i think all that was holding it was brittle insulation; " >this could be my problem... btw the black wire had continuity too. " > " >i have plenty of wire to attach a new connector to, but not enough of " >the molded-on connector to attach. anyone know where i can get one? " >it's a friction push-on to the ground stud. my local advance was no " >help; haven't tried the three other places within walking distance yet. ________________________________________________________________________ Andrew Hay the genius nature internet rambler is to see what all have seen adh@xxxxxxxxxxxxxxxxx and think what none thought