New Page 5Ok, I have a few questions. I went out to the track tonight and ran some of the worst times I ever have. (best of a 14.7 prior to work but usually ran around 15.1 - 15.3 and about a 15.7 now)
My 60 foot time was at best a 2.6 seconds. (close the same as before) Ok, I figured that one out, I'm spinning off the line and slicks would help alot.
Now, my max speed is about 88.5 mph. I used to run about 93/94 mph in the 1/4.
I have changed my cam out with a comp cam 270H. (The prior cam was a Crane Fireball 306C and was good for a band of 2000-4800) It's supposed to be good for 1800-5800 RPM. I thought that would help me out throughout the whole powerband.
Next, I swapped out my original Carter AFB to an Edelbrock 1406 (600 cfm with electric choke).
I guess I'm looking for what I did wrong or what's going on. Can someone explain metering rods?
Heck, my 343 is much tighter sounding and seems as if it has more power than before and it doesn't even leak oil anymore.