Re: 1974 - 232
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 1974 - 232



" From: "Jay" <jciampi@xxxxxxxx>
" 
" ----- Original Message ----- 
" From: "Joe Wyatt" <jwyatt@xxxxxxxxxxxxxx>
" 
" 
" > Any demmand out there for a Crank, pistos/rods, heads or intake from a 
" > 1974 232/six engine.............
" 
" 
" 
" 
" Will the head fit and work on a 1966 232 block?

yes, but -- your c/r will drop if you don't change pistons; the '72-6
head will have 66cc chambers where your '64-7 has 56cc.

you'll also need late-style lifters and pushrods as the bridged
rockers lube that way instead of via gallery, but you can't use the
'74 pushrods as that block is ~1/4" taller than the '66.
________________________________________________________________________
Andrew Hay                                  the genius nature
internet rambler                            is to see what all have seen

adh@xxxxxxxxxxxxxxxxx                       and think what none thought





Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated