Still looking for that 70 grille
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Still looking for that 70 grille



If anyone has a good quality 70 grille that they might like to deal for, I have a number of quality NOS parts that I would consider trading or to use the grille as a partial trade for some of my more expensive stuff.  Tops on the list is a fresh from Kennedy American 727 transmission that has never been used.  Ialso have a very good condietion driver's front fender an door as well as a fiberglass 68/69 hood and bumper combo. 

In addition, I have a NOS 69 service block and a set of used rods that are all setup for use with either my NOS stock cast 68/69 pistons and 58cc heads for a comnpression ratio or 10.18 or with a set of NOS 72 401 cast pistons with 50.6cc at a compression rato of 8.6..your choice.  

This 390 engine will come as a complete short block minus a crank and will only need to have the new pistons installed and the motor assembled with your cam, lifters and heads.  It should be noted that this is a decked block so the piston clearance is only .007 or .008 thus the high compression ratio with 58cc heads on stock pistons. It should also be noted that the head bolts holes have been machined and tapped for 1/2 inch head bolts so 291c or later model 393 (correct number?) will bolt right up.

I also have a comnplete 68/69 carb and air cleaner setup if anyon is interested in that.

If anyone is interested in any of the above and has a good 70 grille that they would like to trade for some good qaulity parts, please let me know.








Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated