Cranking Up The Old 343 Engine
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Cranking Up The Old 343 Engine



You guys out there are the experts. I want to try to crank up my '67 Rebel SST 343 this weekend. The previous owner says the car has not been started in over 3 years. Some people say to remove the plugs and squirt some oil in the cylinders before cranking. Would like your suggestions. Obviously, I will run my gas line from a clean gas container to bypass the junk that is in the gas tank. What about the carburetor? Should I do anything to prep it before firing it up? I also suspect the fuel pump may not work and will test that. Appreciate any guidance you can give me. Thanks.



Thanks,
Gary Parente - email: grparen@xxxxxxxxxxx








Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated