this is also worth a try, thank you.. THE NEEDS OF THE MANY OUTWEIGH THE NEEDS OF THE ONE.. ----- Original Message ----- From: Jim Blair <carnuck@xxxxxxxxxxx> To: amc <mail@xxxxxxxxxxxx> Sent: Wednesday, January 05, 2005 1:53 AM Subject: Re: Jeep Cherokee Tail Gate Question > A: Try a piece of inner tube near the corner on either side. The one I had > ('87) I stuck a piece of thin carpet in to stop it. > > > From: "Peter Klemmensen" <pklemmensen@xxxxxxxxx> > To: mail@xxxxxxxxxxxx > Subject: Re: Jeep Cherokee Tail Gate Question > Date: Tue, 4 Jan 2005 23:40:14 -0500 > > This is for an 86 Cherokee chief, we have the back panel off for some work > back there and the rattling is driving us nuts.. > > THE NEEDS OF THE MANY OUTWEIGH THE NEEDS OF THE ONE.. > ----- Original Message ----- > From: Jim Blair <carnuck@xxxxxxxxxxx> > To: amc <mail@xxxxxxxxxxxx> > Sent: Tuesday, January 04, 2005 6:22 PM > Subject: Re: Jeep Cherokee Tail Gate Question > > > > A: Fullsize or XJ? Fullsize has little rubber stppers that sit in holes > that > > the alignment pins go into. When the rubber wears out (or often, just > falls > > out because it is stuck to the pin when you open it) the metal on metal > > squeak will drive you nuts! I used rubber vacuum caps on my '83 and they > > needed replacing once in awhile (I opened the tailgate a lot) > > > > >