axle shafts (was Re: Islam-a-Bad)
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

axle shafts (was Re: Islam-a-Bad)



A: I will skip the religious stuff except to note I have family in Indonesia 
and other countries doing what the bible tells them to. (several have lost 
their lives in that effort) As for the axles, do you have a D60-2 or Dana 44 
rear axle? Moser are good, but I upgraded my J4000's rear axle to a J20 full 
float. I could have used the parts front axle I had to make it 5 lug, but 
the closed knuckle dana 44 front axle is begging to be swapped as well (I 
have that from a J20 as well, but it requires some mods to bolt in, unlike 
the rear axle) I also did a rear shackle flip to gain 8" of rear lift to 
clear 33/12.50/16.5 tires on wagon wheels, even fully loaded (2 tons of 
brick and a bunch of other stuff.)


From: "Steven M.Dristy, Jr." <soundwve@xxxxxxx>
Subject: Re: Islam-a-Bad
To: mail@xxxxxxxxxxxx
Message-id: <002801c4eefc$c9fbace0$2802a8c0@xxxxxxxxxxxxxxxx>

 And people wonder why I live in Alaska. Here you learn tolerance, or you
don't walk the streets alone at night. (Utter an anti-Alaska Native slur in
Fairbanks, and you'd better run!!)

(snip)
 Please take your religion-based hatred somewhere else. It is not welcome
nor wanted here, and I do not wish to read it.

 AMC content: broke an axle shaft in my '73 J-4000, and need to order a new
one. Want to buy

 a set of Moser axle shafts. Anyone had experience with this manufacturer?? 




Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated