I have around 20 of the kits the factory sent out to fix this problem with instructions. $5.00 ea plus shipping. Even if you do not use you can use for shows. teamamc@xxxxxxxxxxx > A: If the "factory" fix hasn't been done (ie: Chopping the dist connector > off and soldering the wires together) then I would try that first. The > signal is so weak on that style of ignition system that the slightest > corrosion at the plug by the dist it would drop to zero and shut off. Often > just unplugging and replugging the connector would make it start again. > I recently had the engine (258) on a '75 Hornet stop dead while it > was warming up in the driveway. Diagnostics from the factory shop > manual pointed at the distributor pickup being bad. > >