Re: Pertronix Wiring
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Pertronix Wiring



That is the way I'm hooked up on my SC/360.

Blaine Hertzog

----- Original Message ----- 
From: "Neil Shaw" <neil@xxxxxxxxxxxxxxxxxxxxx>
To: "The List" <mail@xxxxxxxxxxxx>
Sent: Tuesday, November 09, 2004 4:06 PM
Subject: Pertronix Wiring


> I'm installing the Pertronix electronic ignition in our '72 Javelin with a
> 304. Many of you have done this and I want to get confirmation that I'm
> hooking the red wire in the correct place.
> According to the instructions it goes to the + side of the coil if you do
> not have a ballast resistor in the line from the starter relay. If you do
> have a ballast resistor it goes before that wire reaches the coil. As far
as
> I can tell from studying the TSM, V8's do not have a ballast resistor or
> resistor wire before the coil. So I should connect the red wire directly
to
> the + side of the coil. Am I correct on this?
> Thanks for the help,
> Neil Shaw
>
>
>
>
>







Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated