Pertronix Wiring

["Neil Shaw" <neil@xxxxxxxxxxxxxxxxxxxxx>]

I'm installing the Pertronix electronic ignition in our '72 Javelin with a
304. Many of you have done this and I want to get confirmation that I'm
hooking the red wire in the correct place.
According to the instructions it goes to the + side of the coil if you do
not have a ballast resistor in the line from the starter relay. If you do
have a ballast resistor it goes before that wire reaches the coil. As far as
I can tell from studying the TSM, V8's do not have a ballast resistor or
resistor wire before the coil. So I should connect the red wire directly to
the + side of the coil. Am I correct on this?
Thanks for the help,
Neil Shaw