Re: [AMC-list] FW: Door plastic fix

["Dan Ritzinger" <danritz@xxxxxxxxxxxxxxx>]

I did a similar fix on my seat backs, forming the pocket from a small piece 
of 1/8" aluminum hot glued to the seat back, per the procedure that I 
described in my last post.  Same results: been holding just fine for 15+ 
years.


-----Original Message----- 
From: Chris Peters
Sent: Wednesday, September 03, 2014 7:37 PM
To: amc-list@xxxxxxxxxxxxxxxxx
Subject: Re: [AMC-list] FW: Door plastic fix

I've used a product called Plast-aid to fix my seat backs which I am
guessing are a similar material to that piece.  However, Plast-aid is really
PVC compatible. It is very cool stuff.  I formed a new pocket that the
seatback hangs on the seat frame with the Plast-aid.  However it popped off
the nylon'ish seat back.  But, I figured I now have this piece just right,
so I superglued it back on.  It has held up for like 10 years now.  It
really is neat stuff.

http://www.plast-aid.com/

------- Original Message ---------

From: Tyson Barbera [mailto:tbamc@xxxxxxxxx]
Sent: Tuesday, September 02, 2014 5:06 PM
To: Ross Guistino

Subject: Door plastic fix




Does any one have a good fix for this interior piece? I tried crazy glue and
p.l. Adhesive. Both worked for one use . Pressure to the top pops the fix .
Any help would be greatly appreciated!
Thanks
Tyson
Even a good lead on a cheap used one. $45 with sun damage and no shipping so
far is the best I have found





http://guistino.com/CarStuff/Tyson/Tyson-image.jpg



http://guistino.com/CarStuff/Tyson/Tyson-image2.jpg



http://guistino.com/CarStuff/Tyson/Tyson-image3.jpg




_______________________________________________
AMC-list mailing list
AMC-list@xxxxxxxxxxxxxxxxx
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com 

_______________________________________________
AMC-list mailing list
AMC-list@xxxxxxxxxxxxxxxxx
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com