Re: [AMC-list] rebuilding a 390

["Steven F. Brueggeman" <amcer@xxxxxxxxxxx>]

Got a roller cam that has the oiling hole in the wrong place, had to modify 
the cam timing gear.

Also have a flat tappet that the oiling hole was slightly off.

-Steve-


----- Original Message ----- 
From: "Armand Eshleman" <aje1@xxxxxxxxxxxxxxx>
To: "AMC, Rambler, Nash, Jeep and family" <amc-list@xxxxxxxxxxxxxxxxx>
Sent: Sunday, February 24, 2013 5:45 PM
Subject: [AMC-list] rebuilding a 390


> I've been rather busy lately.
> I've got a 390 at a machine shop close by.
> Full rebuild in progress.
> Bulltear pistons, Lunati cam, stainless full roller rockers, lots of 
> goodies.
> Go to the cars facebook page "1970AMC Javelin SST" for photos.
>
> Had an interesting experinece.
> received the cam.
> when installing cam, determined it is 2.5 thou out of wack. (used V blocks 
> and dial indicator)
> now getting a different cam and hoping for the best.
> Have any of you experienced this?
>
> Armand
> _______________________________________________
> AMC-list mailing list
> AMC-list@xxxxxxxxxxxxxxxxx
> http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com


_______________________________________________
AMC-list mailing list
AMC-list@xxxxxxxxxxxxxxxxx
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com