Hello everyone,
I'm in the process of restoring my 68 AMX and currently I'm rebuilding the
BW T10 along with the shifter and linkage.
I have just discovered that where the shifter rod bolts to the shifter
assembly there are 2 rubber bushings that are totally shot!!! I guess
these bushings reduce the vibration etc. felt by your hand on the shifter
ball.
Does anyone know where I can obtain these, or suggest an alternate repair?
Thanks,
John
________________________________________
From: amc-list-bounces@xxxxxxxxxxxxxxxxx
[amc-list-bounces@xxxxxxxxxxxxxxxxx] on behalf of
amc-list-request@xxxxxxxxxxxxxxxxx [amc-list-request@xxxxxxxxxxxxxxxxx]
Sent: Tuesday, October 18, 2011 3:00 PM
To: amc-list@xxxxxxxxxxxxxxxxx
Subject: AMC-list Digest, Vol 31, Issue 30
Send AMC-list mailing list submissions to
amc-list@xxxxxxxxxxxxxxxxx
To subscribe or unsubscribe via the World Wide Web, visit
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com
or, via email, send a message with subject or body 'help' to
amc-list-request@xxxxxxxxxxxxxxxxx
You can reach the person managing the list at
amc-list-owner@xxxxxxxxxxxxxxxxx
When replying, please edit your Subject line so it is more specific
than "Re: Contents of AMC-list digest..."
Today's Topics:
1. Re: AMC-list Digest, Vol 31, Issue 24 (Armand Eshleman)
2. Re: 75 Pacer at Pick'n'Pull (Marc Montoni)
----------------------------------------------------------------------
Message: 1
Date: Tue, 18 Oct 2011 07:43:07 -0500
From: "Armand Eshleman" <aje1@xxxxxxxxxxxxxxx>
To: "AMC, Rambler, Nash, Jeep and family" <amc-list@xxxxxxxxxxxxxxxxx>
Subject: Re: [AMC-list] AMC-list Digest, Vol 31, Issue 24
Message-ID: <325757F53FAB4826999440D71BF17A3F@computzer3>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
reply-type=original
Joe, I'll get you a photo sometime today.
----- Original Message -----
From: "Joe" <jgray_55@xxxxxxxxx>
To: <amc-list@xxxxxxxxxxxxxxxxx>
Cc: <Jgray_55@xxxxxxxxx>
Sent: Tuesday, October 18, 2011 12:51 AM
Subject: Re: [AMC-list] AMC-list Digest, Vol 31, Issue 24
Aramand. Any photos of the Javelin hood script?? What $$$ do you need?
thanks alot
--- On Sat, 10/15/11, amc-list-request@xxxxxxxxxxxxxxxxx
<amc-list-request@xxxxxxxxxxxxxxxxx> wrote:
From: amc-list-request@xxxxxxxxxxxxxxxxx
<amc-list-request@xxxxxxxxxxxxxxxxx>
Subject: AMC-list Digest, Vol 31, Issue 24
To: amc-list@xxxxxxxxxxxxxxxxx
Date: Saturday, October 15, 2011, 4:49 PM
Send AMC-list mailing list
submissions to
amc-list@xxxxxxxxxxxxxxxxx
To subscribe or unsubscribe via the World Wide Web, visit
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com
or, via email, send a message with subject or body 'help'
to
amc-list-request@xxxxxxxxxxxxxxxxx
You can reach the person managing the list at
amc-list-owner@xxxxxxxxxxxxxxxxx
When replying, please edit your Subject line so it is more
specific
than "Re: Contents of AMC-list digest..."
Today's Topics:
1. Rebel & Ambassador Nash for sale
really far SOUTH! (Eddie Stakes)
2. AMCs in Cuba (Eddie Stakes)
3. 304 factory 4 bbl? (Jim Blair)
4. Re: 304 factory 4 bbl? (Ken Ames)
5. Re: Need a 401 Crank (Armand
Eshleman)
6. WTF files (Eddie Stakes)
7. 70 AMC Ambassador DONK (Eddie Stakes)
8. Re: 70 AMC Ambassador DONK (Ken Ames)
9. Re: Javelin hood script needed (Armand
Eshleman)
10. Remove flexplate from '68 232 w/ automatic
(Bruce Griffis)
11. Re: Remove flexplate from '68 232 w/ automatic
(Joe Fulton)
----------------------------------------------------------------------
Message: 1
Date: Fri, 14 Oct 2011 14:25:13 -0500
From: "Eddie Stakes" <eddiestakes@xxxxxxxxxxxxxxxxxxxx>
To: <baadassGremlins@xxxxxxxxxxxxxxx>,
<amc-list@xxxxxxxxxxxx>
Subject: [AMC-list] Rebel & Ambassador Nash for sale
really far SOUTH!
Message-ID:
<7BECD1B9A6394DDF9A5366E8CD9815C6@piageedc1iqa5q>
Content-Type: text/plain; format=flowed;
charset="iso-8859-1";
reply-type=original
http://carro.mercadolivre.com.br/MLB-201773295-amc-rambler-rebel-1967-v8-302-alcool-_JM
http://carro.mercadolivre.com.br/MLB-201344998-nash-ambassador-1951-impala-belair-buick-ford-1929-sp2-_JM
Eddie Stakes
713.464.8825
eddiestakes@xxxxxxxxxxxxxxxxxxxx
www.planethoustonamx.com
------------------------------
Message: 2
Date: Fri, 14 Oct 2011 14:27:32 -0500
From: "Eddie Stakes" <eddiestakes@xxxxxxxxxxxxxxxxxxxx>
To: <baadassGremlins@xxxxxxxxxxxxxxx>,
<amc-list@xxxxxxxxxxxx>
Subject: [AMC-list] AMCs in Cuba
Message-ID:
<9BAD044B3A704DE6A53DEAD327AA16B8@piageedc1iqa5q>
Content-Type: text/plain; format=flowed;
charset="iso-8859-1";
reply-type=original
http://travel.webshots.com/photo/2387802860054188876qYjiOY
http://travel.webshots.com/photo/2840318270054188876MRbyXX
http://www.cubaautos.org/car/index/brand/rambler/year/1957/model/custom/id/99
http://www.cubaautos.org/car/index/brand/rambler/year/1959/model/custom/id/20
ole! Damn, how do they keep them looking timeless?
Eddie Stakes
713.464.8825
eddiestakes@xxxxxxxxxxxxxxxxxxxx
www.planethoustonamx.com
------------------------------
Message: 3
Date: Fri, 14 Oct 2011 12:46:49 -0700
From: Jim Blair <carnuck@xxxxxxxxxxx>
To: <amc-list@xxxxxxxxxxxxxxxxx>
Subject: [AMC-list] 304 factory 4 bbl?
Message-ID: <SNT114-W17806BF9D7926538C8BFBFACE10@xxxxxxx>
Content-Type: text/plain; charset="iso-8859-1"
I can't find my '71 Jeep Honcho catalog showing 304 4 bbl
as a factory option (I just remember it was VIN code D)
Anyone got a CJ catalog with that or did AMC only have the
SP2P in special packages?
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://list.amc-list.com/pipermail/amc-list-amc-list.com/attachments/20111014/f88cdd41/attachment.htm>
------------------------------
Message: 4
Date: Fri, 14 Oct 2011 14:14:51 -0600
From: Ken Ames <ameskg@xxxxxxxxx>
To: "AMC, Rambler, Nash, Jeep and family" <amc-list@xxxxxxxxxxxxxxxxx>
Subject: Re: [AMC-list] 304 factory 4 bbl?
Message-ID: <1318623291.4e98983bc0637@xxxxxxxxxxxxxxxxxxxxxxx>
Content-Type: text/plain; charset=ISO-8859-1
My files show VIN 'M' for the 4bbl.
Ken
Quoting Jim Blair <carnuck@xxxxxxxxxxx>:
>
> I can't find my '71 Jeep Honcho catalog showing 304 4
bbl as a factory option
> (I just remember it was VIN code D) Anyone got a CJ
catalog with that or did
> AMC only have the SP2P in special packages?
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
>
<http://list.amc-list.com/pipermail/amc-list-amc-list.com/attachments/20111014/f88cdd41/attachment.htm>
> _______________________________________________
> AMC-list mailing list
> AMC-list@xxxxxxxxxxxxxxxxx
> http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com
>
------------------------------
Message: 5
Date: Fri, 14 Oct 2011 18:09:10 -0500
From: "Armand Eshleman" <aje1@xxxxxxxxxxxxxxx>
To: "AMC, Rambler, Nash, Jeep and family" <amc-list@xxxxxxxxxxxxxxxxx>
Subject: Re: [AMC-list] Need a 401 Crank
Message-ID: <004401cc8ac6$493d17c0$03fea8c0@xxxxxxxxxxxxxx>
Content-Type: text/plain;
charset="iso-8859-1"
Agreed on that experienced machinist thing.
When asked of a hometown machinist to work on AMC engine
pieces, his comment
pretty much went like this.
"You mean this isn't a chevy 350? I'm not sure what you're
talking about,
AMC? All the engines around here that we work on are 350
chevies. I didn't
know any other engines ever needed a
rebuild.............OH, wait a minute,
we work on tractor engine parts here too. We mostly turn
cranks, size rods
and do heads cause those blocks usually have wet sleeves.
but wait I'll ask
'turbo' if he knows anything about AMC."
response from 'turbo', "Yeah I heard of AMC, that's
American Movie Classics
on channel 69"
Sigh, I finally did find a great machinist in a little town
South of here
who knew exactly what an AMC is and said, "Yeah bring it
down we'll work on
it for you."
Armand
----- Original Message -----
From: "Marc Montoni" <Freedom@xxxxxxxx>
To: <amc-list@xxxxxxxxxxxxxxxxx>
Sent: Thursday, October 13, 2011 9:35 PM
Subject: Re: [AMC-list] Need a 401 Crank
>
> markprice242 <wrambler242@xxxxxxxxxxx>
said:
>
>
> >>WOW, we are cheap...and paranoid it seems!
ROFLOL.
>
>
> <snicker> Yeah, but paranoid from long
experience with shop monkeys
trained at the local Vo-Tech high school whose only
interest was Chevys (or
more recently, ricers).
>
> Few are the experienced machinists any more who 1)
actually know how good
the AMC block really was and 2) understand that it can't
just be "slapped
together" like a 350...
>
>
>
>
>
------------------------------------------------------------------------
> MARC MONTONI
> Harrisonburg VA
> http://FreeVirginia.blogspot.com/
> Freedom. Responsibility. www.LP.org
> Cu vi parolas Esperanton?
> I'd rather push a Rambler than drive a Toyota.
> Visit www.AMCRC.com or www.AMONational.com .
> http://RichmondRambler.tripod.com/
> http://Hasdrubal.tripod.com/Index.htm
>
------------------------------------------------------------------------
> This work is licensed under a Creative Commons
Attribution-Noncommercial-Share Alike 3.0 United States
License.
>
>
> _______________________________________________
> AMC-list mailing list
> AMC-list@xxxxxxxxxxxxxxxxx
> http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com
------------------------------
Message: 6
Date: Fri, 14 Oct 2011 21:21:20 -0500
From: "Eddie Stakes" <eddiestakes@xxxxxxxxxxxxxxxxxxxx>
To: <baadassGremlins@xxxxxxxxxxxxxxx>,
<amc-list@xxxxxxxxxxxx>
Subject: [AMC-list] WTF files
Message-ID:
<6D8329F431654BFB939500804A8B1AE8@piageedc1iqa5q>
Content-Type: text/plain; format=flowed;
charset="iso-8859-1";
reply-type=original
Dad needs to kick the kid out of the house:
http://lafayette.craigslist.org/pts/2645807355.html
=========================
CLASSIC UGLY-AS-DIRT BLUE AMC GREMLIN FOR SALE, SHINY BLUE
BENCH SEAT, ENOUGH ROOM TO FIT
AT LEAST 3 PEOPLE AND MAN, YOU'LL NEVER HAVE TO WORRY ABOUT
THIS CLASSIC BEING STOLEN!
SITTIN IN THE YARD, WAITING FOR THE RIGHT OFFER TO COME
ALONG....
JUST TWO HOURS FROM LAFAYETTE, LA...
JUST KIDDING DAD!!
a.. Location: LIVINGSTON, LA
b.. ===========================
Eddie Stakes
713.464.8825
eddiestakes@xxxxxxxxxxxxxxxxxxxx
www.planethoustonamx.com
------------------------------
Message: 7
Date: Fri, 14 Oct 2011 21:13:41 -0500
From: "Eddie Stakes" <eddiestakes@xxxxxxxxxxxxxxxxxxxx>
To: <baadassGremlins@xxxxxxxxxxxxxxx>,
<amc-list@xxxxxxxxxxxx>
Subject: [AMC-list] 70 AMC Ambassador DONK
Message-ID:
<7E5625809F5540868D706C3EB14B4E05@piageedc1iqa5q>
Content-Type: text/plain; format=flowed;
charset="iso-8859-1";
reply-type=original
I never knew AMC made a Donk.
http://jacksonville.craigslist.org/cto/2575853325.html
Eddie Stakes
713.464.8825
eddiestakes@xxxxxxxxxxxxxxxxxxxx
www.planethoustonamx.com
------------------------------
Message: 8
Date: Sat, 15 Oct 2011 01:15:28 -0600
From: Ken Ames <ameskg@xxxxxxxxx>
To: Eddie Stakes <eddiestakes@xxxxxxxxxxxxxxxxxxxx>,
"AMC, Rambler,
Nash, Jeep and family"
<amc-list@xxxxxxxxxxxxxxxxx>
Subject: Re: [AMC-list] 70 AMC Ambassador DONK
Message-ID: <1318662928.4e9933105da27@xxxxxxxxxxxxxxxxxxxxxxx>
Content-Type: text/plain; charset=ISO-8859-1
Other d*nk words come to mind.
Ken
Quoting Eddie Stakes <eddiestakes@xxxxxxxxxxxxxxxxxxxx>:
> I never knew AMC made a Donk.
>
> http://jacksonville.craigslist.org/cto/2575853325.html
>
> Eddie Stakes
> 713.464.8825
> eddiestakes@xxxxxxxxxxxxxxxxxxxx
> www.planethoustonamx.com
>
> _______________________________________________
> AMC-list mailing list
> AMC-list@xxxxxxxxxxxxxxxxx
> http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com
>
------------------------------
Message: 9
Date: Sat, 15 Oct 2011 09:44:30 -0500
From: "Armand Eshleman" <aje1@xxxxxxxxxxxxxxx>
To: "AMC, Rambler, Nash, Jeep and family" <amc-list@xxxxxxxxxxxxxxxxx>
Subject: Re: [AMC-list] Javelin hood script needed
Message-ID: <000701cc8b48$f34e4180$03fea8c0@xxxxxxxxxxxxxx>
Content-Type: text/plain;
charset="iso-8859-1"
I found a couple.
One of them is still in pretty good shape, has all three
mounting pins.
Let me know if you want it.
Armand
------------------------------
Message: 10
Date: Sat, 15 Oct 2011 11:10:54 -0400
From: Bruce Griffis <bruce.griffis@xxxxxxxxx>
To: "AMC, Rambler, Nash, Jeep and family" <amc-list@xxxxxxxxxxxxxxxxx>
Subject: [AMC-list] Remove flexplate from '68 232 w/
automatic
Message-ID:
<CAEGO9uqoxXysJrXXfyiQjJ=hytSEe7dSODidNT1R68PXkFbzSQ@xxxxxxxxxxxxxx>
Content-Type: text/plain; charset=UTF-8
cross-posted on theamcforum:
I started working on my engine swap. I pulled the automatic
off the
232. No problems. I removed the bellhousing. I'm trying to
remove the
flexplate but running into issues. When I try to turn the
9/16" bolts,
the who flexplate revolves. Should I brace a screwdriver
between some
teeth to hold it still? Any tricks? If compression is good,
should the
flexplate turn as I try to remove the bolts?
Any hints and tricks? Or just hit all the bolts with
penetrating oil,
brace against the teeth (I'm not re-using the flexplate,
I'm swapping
to manual) and use a big ol' wrench?
------------------------------
Message: 11
Date: Sat, 15 Oct 2011 08:49:10 -0700 (PDT)
From: Joe Fulton <piper_pa20@xxxxxxxxxxx>
To: "AMC, Rambler, Nash, Jeep and family" <amc-list@xxxxxxxxxxxxxxxxx>
Subject: Re: [AMC-list] Remove flexplate from '68 232 w/
automatic
Message-ID: <1318693750.63493.YahooMailRC@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
Content-Type: text/plain; charset=iso-8859-1
Bruce,
Those flexplates are pretty fragile.?? I suggest that you
pull on spark plug and
insert a long piece of rope (3/8th inch cotton or nylon
will work).?? The rope
will act to cushion the piston against the cylinder head
and jam the piston so
the crank can't turn.? Leave one end of the rope sticking
out of the spark plug
hole so you can remove it easily when you have removed the
flexplate.
Joe Fulton
----- Original Message ----
From: Bruce Griffis <bruce.griffis@xxxxxxxxx>
To: "AMC, Rambler, Nash, Jeep and family" <amc-list@xxxxxxxxxxxxxxxxx>
Sent: Sat, October 15, 2011 8:10:54 AM
Subject: [AMC-list] Remove flexplate from '68 232 w/
automatic
cross-posted on theamcforum:
I started working on my engine swap. I pulled the automatic
off the
232. No problems. I removed the bellhousing. I'm trying to
remove the
flexplate but running into issues. When I try to turn the
9/16" bolts,
the who flexplate revolves. Should I brace a screwdriver
between some
teeth to hold it still? Any tricks? If compression is good,
should the
flexplate turn as I try to remove the bolts?
Any hints and tricks? Or just hit all the bolts with
penetrating oil,
brace against the teeth (I'm not re-using the flexplate,
I'm swapping
to manual) and use a big ol' wrench?
_______________________________________________
AMC-list mailing list
AMC-list@xxxxxxxxxxxxxxxxx
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com
------------------------------
_______________________________________________
AMC-list mailing list
AMC-list@xxxxxxxxxxxxxxxxx
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com
End of AMC-list Digest, Vol 31, Issue 24
****************************************
_______________________________________________
AMC-list mailing list
AMC-list@xxxxxxxxxxxxxxxxx
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com
------------------------------
Message: 2
Date: Tue, 18 Oct 2011 08:56:09 -0400
From: Marc Montoni <Freedom@xxxxxxxx>
To: amc-list@xxxxxxxxxxxxxxxxx
Subject: Re: [AMC-list] 75 Pacer at Pick'n'Pull
Message-ID: <20111018130400.2C85A8DB0F08@xxxxxxxxxxxxxxxxxxxx>
Content-Type: text/plain; charset="us-ascii"
Joe Fulton <piper_pa20@xxxxxxxxxxx> said:
No problem.? Just go to your AMC dealer and order two quarter panels and
a
bumper.?
Well maybe not an AMC dealer but here's one side:
http://amxbruce.com/com/html/FMPro?-db=EZpub&-lay=pages&-format=BP.htm&-op=eq&partrefsec=7279&-Max=40&-sortfield=PartOrder&sortorder=ascending&-find#7410
-- Marc
------------------------------
_______________________________________________
AMC-list mailing list
AMC-list@xxxxxxxxxxxxxxxxx
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com
End of AMC-list Digest, Vol 31, Issue 30
****************************************
_______________________________________________
AMC-list mailing list
AMC-list@xxxxxxxxxxxxxxxxx
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com
Back to the Home of the AMC Gremlin