Rockauto again says the Cherokee and Eagle rotors aren't quite the same. Height is .2" more on the Jeep and .08" thicker too. Probably fit, but not the same (compared 1981 to 1994). Ken Quoting "(Sandwich Maker)" <adh@xxxxxxxxxxxxxxxxx>: > " From: Jim Blair <carnuck@xxxxxxxxxxx> > " > " > " Some are one piece. Some are rotors on hubs with bearings. Not sure > " which is on the '89 MJ I just picked up > > not sure either. i -think- it'd be eagle rotors on hubs like earlier. > > " From: adh@xxxxxxxxxxxxxxxxx (Sandwich Maker) > " > " " From: Jim Blair <carnuck@xxxxxxxxxxx> > " " > " " > " " I wanted to use the drum hubs (or ones that are 5 on 4.5") and XJ > " " rotors. IF I swap the '82 Spirit's front end and make it a Pre-runner, > " " that's the setup it has to go on it. > " > " iirc 2wd xjs also used the same bearing sets as amc. early xjs - 2wd > " and 4wd - used eagle rotors; afaik later 2wd xjs went to a compatible > " 1-pc rotor/hub. > ________________________________________________________________________ > Andrew Hay the genius nature > internet rambler is to see what all have seen > adh@xxxxxxxxxxxxxxxxx and think what none thought > _______________________________________________ > AMC-list mailing list > AMC-list@xxxxxxxxxxxxxxxxx > http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com > _______________________________________________ AMC-list mailing list AMC-list@xxxxxxxxxxxxxxxxx http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com