" From: Jim Blair <carnuck@xxxxxxxxxxx> " " " Some are one piece. Some are rotors on hubs with bearings. Not sure " which is on the '89 MJ I just picked up not sure either. i -think- it'd be eagle rotors on hubs like earlier. " From: adh@xxxxxxxxxxxxxxxxx (Sandwich Maker) " " " From: Jim Blair <carnuck@xxxxxxxxxxx> " " " " " " I wanted to use the drum hubs (or ones that are 5 on 4.5") and XJ " " rotors. IF I swap the '82 Spirit's front end and make it a Pre-runner, " " that's the setup it has to go on it. " " iirc 2wd xjs also used the same bearing sets as amc. early xjs - 2wd " and 4wd - used eagle rotors; afaik later 2wd xjs went to a compatible " 1-pc rotor/hub. ________________________________________________________________________ Andrew Hay the genius nature internet rambler is to see what all have seen adh@xxxxxxxxxxxxxxxxx and think what none thought _______________________________________________ AMC-list mailing list AMC-list@xxxxxxxxxxxxxxxxx http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com