Just to clarify: I don't have a set of trammel points so I was using a metal tape to measure the widest point of the block. Measurat the rear where there was less interference, to the base of the "ledges" on each side. As I said the widest point. Of course this obviously doesn't make any difference to anyone outside of the foundry. Joe Fulton ----- Original Message ---- From: Frank Swygert <farna@xxxxxxx> To: amc-list@xxxxxxxxxxxxxxxxx Sent: Sun, April 3, 2011 12:00:48 PM Subject: Re: [AMC-list] Following up on AMC V8 external dimensions I never heard that before, but then I haven't been in a position where 3/8" difference (3/16" on each side) would matter. The block deck height didn't change though, has to be a minor difference due to the bigger bores -- same thing on the 258 vs. 4.0L block (4.0L is about 1/8" wider) and the aluminum vs. cast iron 196 OHV (AL head is about 1/4" wider). If the deck height changed it would throw the width of the intake off a bit, and we know the intakes interchange amongst GEN-2 and GEN-3 engines. It could be slightly taller (under 1/8") and the GEN-3 intakes would work -- the GEN-2 and 3 intakes interchange but there is only around 1/16" deck height difference. ---------- Date: Sun, 3 Apr 2011 08:42:47 -0700 (PDT) From: Joe Fulton<piper_pa20@xxxxxxxxxxx> Indeed the 390 block is a bit wider than the 360 block at least.? I have a couple of 360s in my spare room and a 1970 390 in the garage.? The 360s (casting 3195528) are about 18 1/8 inches across the widest dimension.? The 390 block (casting 3195529) is about 18 1/2 inches across the widest point.?? Can't check deck height.? Joe Fulton? -- Frank Swygert Publisher, "American Motors Cars" Magazine (AMC) For all AMC enthusiasts http://www.amc-mag.com (free download available!) _______________________________________________ AMC-list mailing list AMC-list@xxxxxxxxxxxxxxxxx http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com _______________________________________________ AMC-list mailing list AMC-list@xxxxxxxxxxxxxxxxx http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com