I just sold the Jeep T5 parts trans I had. Still have the mechanical linkage bell, shifter and flywheel/ clutch in the for sale pile cheap : Tue, 1 Jun 2010 14:59:35 -0400 (EDT) From: adh@xxxxxxxxxxxxxxxxx (Sandwich Maker) To: amc-list@xxxxxxxxxxxx Subject: Re: [AMC-list] time to find a stout 5 spd tranny now i think. Message-ID: " From: "Armand Eshleman" " " Here's a little more T5 information, the Ford sourced T5 up to 1993 will " exchange with an AMC T5, bolt right up to that multi pattern bellhousing " that AMC made. The input shaft housing is a larger diameter where it mates " to the bell housing so the input shaft housing will need to be turned down " in a lathe to match the hole in the bell, or swap an AMC input housing onto " the T5. that 'input shaft housing' is called the front bearing retainer, and the 5.0 t5's is the same size as the amc t150 3sp and jeep t177 4sp which used the multipattern bell. also, 4-cyl ford t5 retainers may be the smaller amc/gm diameter. " Use the AMC bell housing/clutch linkage/throwout bearing parts too. There " are a lot more Ford sourced T5s out there than AMC T5s. The spline of the " input shaft is 1/16 less in diameter than the AMC but is easily dealt with " by using a Ford sourced clutch disc. likewise, easy to solve the ford pilot bearing problem with a t150-app part. ________________________________________________________________________ _________________________________________________________________ Hotmail is redefining busy with tools for the New Busy. Get more from your inbox. http://www.windowslive.com/campaign/thenewbusy?ocid=PID28326::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_2 -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://list.amc-list.com/pipermail/amc-list-amc-list.com/attachments/20100601/4ebbba95/attachment.htm> _______________________________________________ AMC-list mailing list AMC-list@xxxxxxxxxxxx http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com