[AMC-list] Fw: 66 6 cyl driveshaft removal question
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[AMC-list] Fw: 66 6 cyl driveshaft removal question
- From: "Eddie Stakes" <eddiestakes@xxxxxxxxxxxxxxxxxxxx>
- Date: Thu, 13 Aug 2009 18:15:12 -0500
The folks below are fixin to remove the driveshaft on their 66 Classic. Way out of my
league however figured many of you have done this and could help out, thanks in advance to
all who might reply with tips and advise, and be sure to copy your reply directly to them
also.
Eddie Stakes
713.464.8825
eddiestakes@xxxxxxxxxxxxxxxxxxxx
www.planethoustonamx.com
----- Original Message -----
From: "Keith Evenson" <epd@xxxxxxxxxxxx>
Subject: 66 6 cyl
I need to take the clutch out of a 66 Classic with a 6 cyl and need any advice on what
or how to remove the drive shaft? I have not looked at it too close but it is an
enclosed shaft (meaning there is a case over the outside) and I have not dealt with that
kind of set up before.
Thanks,
Keith Evenson
_______________________________________________
AMC-list mailing list
AMC-list@xxxxxxxxxxxx
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com
Back to the Home of the AMC Gremlin