I'm really happy with the factory floor shifter for the t-96 OD. It's super short through with a crazy narrow gate. Action is tight and precise, surprising for a 46 year old consumer product! I had it fully apart to clean and lube, but there wasn't much wear, mostly on the travel limiting top plate, made from a ahrd plastic with less wear than you'd think (and which you can easily abricate and replace from the top). Rods go high over the trans levers and a cable for the OD. Might be somewhat hard to find, but it is a nice separate module. B&M makes nice fat cables with clevis ends for their Megashifter (etc) shifters in various lengths, but the OD cable could be a hacked up heater (solid wire) cable, it's not too complex. -- All of your arguments are invalid. Enjoy your unstable system. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://list.amc-list.com/pipermail/amc-list-amc-list.com/attachments/20090610/117a9773/attachment.htm> _______________________________________________ AMC-list mailing list AMC-list@xxxxxxxxxxxx http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com