Thanks Tom, The pics you have documented are great. Your web site is like having a set of Rambler encyclopedias on the shelf. Mike Klepp -----Original Message----- From: tom jennings <tomj@xxxxxxx> To: AMC, Rambler, Nash, Jeep and family <amc-list@xxxxxxxxxxxx> Sent: Fri, 29 May 2009 6:07 pm Subject: Re: [AMC-list] Exhaust pipe gasket help needed On Fri, May 29, 2009 at 13:53, <mask1966@xxxxxxx> wrote: > Thanks, that's what I need, a set of eyes on what't needed before I rip it > apart. http://wps.com/AMC/1963-Rambler-American/Nash-195.6OHV-engine/Exhaust-Manifold/ Invoice is in the mail. Seriously, I saved one good exhaust pipe end just for this reason, and I hate measuring things twice. Besides, with my documentation on my website, I can plot and plan when I'm at work, and do research and order stuff without getting grubby. Mark's idea might work, but my fear is that if/when the exhaust pipe moves around, it will grind up the asbestos (or whatever it is) flange donut gaskets. I think the perfect thing would be a brass donut, circular cross section of about 3/8 - 1/2". Then a regular flare would have a nice face to meet. (I'm trying to document every single thing I touch on the 195.6 OHV since there's so little good info, and a lot of undeserved reputation. http://wps.com/AMC/1963-Rambler-American/Nash-195.6OHV-engine) -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://list.amc-list.com/pipermail/amc-list-amc-list.com/attachments/20090529/1a3fe75c/attachment.htm> _______________________________________________ AMC-list mailing list AMC-list@xxxxxxxxxxxx http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://list.amc-list.com/pipermail/amc-list-amc-list.com/attachments/20090530/98fb7f9e/attachment.htm> _______________________________________________ AMC-list mailing list AMC-list@xxxxxxxxxxxx http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com