AFAIK the 2 litre Gremlins used an HR1 for a 4-speed. Ken Quoting Jim Blair <carnuck@xxxxxxxxxxx>: > > Dana 60 (and Dana 53)was also used in the J20 (J4000) pickups in the rear. > M715s ran D60 closed knuckle front and D70 rear. > > On the Audi 2.0L (also found in the last couple years of Gremlins) there is > also the possible option of a Jetta diesel 1.9L used in the late '80s (sadly > non-turbo) I just turned one down from a friend of mine for $1200 so she is > fixing it up instead (new struts, carpet etc) and selling it for $2500. > Wonder if they only used the SR4 in the 2.0L Gremlins? > > > From: adh@xxxxxxxxxxxxxxxxx (Sandwich Maker) > Subject: Re: [AMC-list] 75 J-10 central Coast > To: amc-list@xxxxxxxxxxxx > Message-ID: > > " From: Joe Fulton > " > " > " My favorite local junkyard has a 1975 J-10 in front of their office for > " sale. It's a 360 4-bbl according to the VIN. It's up on a car hauler > " so I can't look inside. The cab body is good. There's some corrosion > " bubbles around the floor level of the bed. Short bed, gold in color. > " Good tail gate. You can get it for $750 or less. It's exempt from > " California smog testing. I noticed that it doesn't have an AMC 20 rear > " axle. Would it be a Dana? > > yup. jeep only used the amc20 '76-'86; dana otherwise until the > ex-amc15 d35 in the late '80s and mopar 8.25" mid '90s. still many > d30s and d44s. > > " There are also four DJs (mail jeeps) in the yard. It may only be three > " mail jeeps by the end of the day though. One poor little jeep with an > " Iron Duke on board was sitting mighty close to the crusher and it's > " knees were shaking when I walked by. > > i was thinking more about what jim blair said about the audi-4 tf904 > [as found in some djs] fitting vw engines as well and saying how a > little diesel would be nice... i discount the prechamber gen [1.6 et > al] as too underpowered, but the '95-'03 1.9 tdi still has a bosch ve > injection pump, pre-common-rail, and 90hp with 150 ft-lbs, rpms > unknown. that sounds pretty good for a light little dj... it still > has a cam-drive belt, so there's a '98-'03 audi tdi v6 if you prefer, > all gear drive if i understand right, and also with a ve pump. 2.5L, > 150hp, torque unk but must be in the 230 area. that'd do for a spirit > or concord... > > in principle, with the old-style injection system they could be > de-electronicized, but in practice you'd probably better be a diesel > mech with healthy bosch experience. > > also a challenge would be appropriate flexplates and torque > converters. > ________________________________________________________________________ > Andrew Hay the genius nature > internet rambler is to see what all have seen > adh@xxxxxxxxxxxxxxxxx and think what none thought > _________________________________________________________________ > Lauren found her dream laptop. Find the PC that?s right for you. > http://www.microsoft.com/windows/choosepc/?ocid=ftp_val_wl_290 > _______________________________________________ > AMC-list mailing list > AMC-list@xxxxxxxxxxxx > http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com > _______________________________________________ AMC-list mailing list AMC-list@xxxxxxxxxxxx http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com