Everybody- Thanks for the responses and thanks for the input on the transmission. I was going from memory on the specific ID of the trans. I'll get out to the garage and check it later on today. A few things have already been spoken for, including the hood release, carburetor, dipstick tube and aircleaner assembly. Let me know if there's anything else ya want. dan Quoting Dan Strohl <DStrohl@xxxxxxxxxxxx>: > > Okay, I let the garage get so full of junk that I can hardly move around > in it. Which means it's time to purge. So before I pay some slobbering > idiot in a truck held together with spit and bailing wire to haul this > stuff away, I thought I'd see if anybody here wants any of it. $1 each, > plus the cost of shipping: > > * dipstick and dipstick tube from a 1982 258 > * hood release cable and handle (not broken) from a Spirit > * 2bbl carburetor from a 1979 258 > * various heights of oil pump pickup tubes from 258s and 4.0Ls > * oil pumps from 258s and 4.0Ls > * air cleaner assembly from either a '79 or '82 258 > * engine mounts from a '93 XJ, 4.0L > * trailer mirrors from a '63 J-200 > * four-bladed fans (3 of 'em) from various 258s and a clutch-driven fan > from a '93 XJ. Includes an assortment of spacers. > * assorted pulleys from the above-mentioned engines > * water necks from the above-mentioned 258s > * sunvisors and miscellaneous interior stuff from a '93 XJ > * I also have all the ball joints, idler arms, etc. left over from the > suspension rebuild on my '79 AMX. I recall somebody on the list > complaining that the new ball joints, idler arms, etc. are junk, and > they'd only re-use old ones. > > Also, I still have the transmission from the '79 AMX (it was behind a > six-cylinder, so that's a TF998, correct?). I'd prefer not to go through > the hassle of shipping it, so that's free to anybody who's willing to > come get it. Still have the torque converter and flexplate for it. > Located in Bennington, VT. > > If you can't afford the dollar, I will trade for tiny trinkets and beads > of no value. But only if you're Dutch. > > Note that this is part 1. Part 2 will come when I scrape away this layer > of junk (er, I mean, useful parts) and can get to the next layer. I > think there's some good stuff in the next layer. > > If you need pix, let me know. I am easily reached either at this email > address or at danielstrohl@xxxxxxxxx > > thank you, > dan > > -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/ms-tnef Size: 3859 bytes Desc: not available Url : http://splatter.wps.com/pipermail/amc-list/attachments/20090214/255b1fb3/attachment.bin _______________________________________________ Amc-list mailing list Amc-list@xxxxxxxxxxxx http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list