Re: [Amc-list] dolla days, part 1

[Greg Taylor <amundaza@xxxxxxxxx>]

I think 998's were only in the Eagles and Jeeps ... again "think", LOL!

Sincerely, 
Greg Taylor :) <>< 
Rochester Hills, MI
1989 Jeep Grand Wagoneer "TRMN8R2"




--- On Fri, 2/13/09, Ken Ames <ameskg@xxxxxxxxx> wrote:

From: Ken Ames <ameskg@xxxxxxxxx>
Subject: Re: [Amc-list] dolla days, part 1
To: "AMC/Rambler owners, drivers and fans." <amc-list@xxxxxxxxxxxx>
Date: Friday, February 13, 2009, 3:34 PM

The transmission should be a 904, not 998. The numbers stamped on the
driver's
side just above the pan will tell all.

Ken


Quoting Dan Strohl <DStrohl@xxxxxxxxxxxx>:

> 
> Okay, I let the garage get so full of junk that I can hardly move around
> in it. Which means it's time to purge. So before I pay some slobbering
> idiot in a truck held together with spit and bailing wire to haul this
> stuff away, I thought I'd see if anybody here wants any of it. $1
each,
> plus the cost of shipping:
> 
> * dipstick and dipstick tube from a 1982 258
> * hood release cable and handle (not broken) from a Spirit
> * 2bbl carburetor from a 1979 258
> * various heights of oil pump pickup tubes from 258s and 4.0Ls
> * oil pumps from 258s and 4.0Ls
> * air cleaner assembly from either a '79 or '82 258
> * engine mounts from a '93 XJ, 4.0L
> * trailer mirrors from a '63 J-200
> * four-bladed fans (3 of 'em) from various 258s and a clutch-driven
fan
> from a '93 XJ. Includes an assortment of spacers.
> * assorted pulleys from the above-mentioned engines
> * water necks from the above-mentioned 258s
> * sunvisors and miscellaneous interior stuff from a '93 XJ
> * I also have all the ball joints, idler arms, etc. left over from the
> suspension rebuild on my '79 AMX. I recall somebody on the list
> complaining that the new ball joints, idler arms, etc. are junk, and
> they'd only re-use old ones.
> 
> Also, I still have the transmission from the '79 AMX (it was behind a
> six-cylinder, so that's a TF998, correct?). I'd prefer not to go
through
> the hassle of shipping it, so that's free to anybody who's willing
to
> come get it. Still have the torque converter and flexplate for it.
> Located in Bennington, VT.
> 
> If you can't afford the dollar, I will trade for tiny trinkets and
beads
> of no value. But only if you're Dutch.
> 
> Note that this is part 1. Part 2 will come when I scrape away this layer
> of junk (er, I mean, useful parts) and can get to the next layer. I
> think there's some good stuff in the next layer.
> 
> If you need pix, let me know. I am easily reached either at this email
> address or at danielstrohl@xxxxxxxxx
> 
> thank you,
> dan
> 
> 
> _______________________________________________
> Amc-list mailing list
> Amc-list@xxxxxxxxxxxx
> http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list
> 


_______________________________________________
Amc-list mailing list
Amc-list@xxxxxxxxxxxx
http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list



      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://splatter.wps.com/pipermail/amc-list/attachments/20090213/14b34fec/attachment.htm 
_______________________________________________
Amc-list mailing list
Amc-list@xxxxxxxxxxxx
http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list