Well I located a rear axle from John's Auto Salvage in Seguin, Texas about 175 miles west of me for my 81 Eagle, 4cylinder, 4speed, which has been patiently waiting for a 3:54 rear axle now for over 3 months. However, John called back this morning and told me that 'the SX/4 is missing a axle' to which I told him that would basically put me back to square one and I could not use the thing if not complete. He said he has some 'non 4 wheel drive AMCs' in there and would check to see in his books what might interchange. I am totally unfamilar with what might interchange when it comes to later model AMCs and two wheel drive to four wheel drive. So my question would be what type axle would interchange, if any, with the SX/4 one he has at the salvage yard missing one axle? I'm sure he is going thru the Mitchell interchange manuals now to look but figured would toss this on here in the meantime. My axles in my 81 Eagle are no good and I also told him that, and don't want to buy a rear end missing stuff like axle, again, no use to me. Thanks for any replies, especially quickly, simply because I don't want a rear end with a incorrect axle shoved in it! Eddie Stakes 713.464.8825 eddiestakes@xxxxxxxxxxxxxxxxxxxx www.planethoustonamx.com email volume HEAVY reply currently 8-19 days, just call! _______________________________________________ Amc-list mailing list Amc-list@xxxxxxxxxxxx http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list