Re: [Amc-list] T96, T14 clutch -- final numbers
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Amc-list] T96, T14 clutch -- final numbers



OK, I just went out with calipers, tape measure and pad, and
measured T96's and T14.


Transmissions:
		input spline	input nose to flat	over all length

T96+OD		10T x 1.00"	approx. 7 1/8"		approx. 19 3/4"
T96+OD+TT	10T x 1.00"	approx. 7 1/8"		approx. 20"
T14 non-OD	10T x 1.00"	approx. 7 1/8"		approx. 23 5/8"
T150+OD		10T x 1.055"	(didn't measure)	approx. 28"

Clutch disc:

8.5" disc	10T x 1.111"
9.25" disc	10T x 1.110"

Bell housings:

The T14 will NOT mate to a T96 bellhousing and vice versa. And
I have a multi-drilled pre-72 six bell, and no holes line up
with the T96.


My conclusion: The AMC clutch is apparently unique.

_______________________________________________
Amc-list mailing list
Amc-list@xxxxxxxxxxxx
http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list


Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated