Re: [Amc-list] Twin Stick shift knob replacements
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Amc-list] Twin Stick shift knob replacements
- From: Wrambler242@xxxxxxxxxxx
- Date: Sat, 03 Nov 2007 02:16:26 +0000
How do you find this carp!
Geez, it took me forever to weed out the overpriced crap and order radio install gear to put a head unit in the 98 Altima and an antenna adapter to allow me to put my 4 disc indash Chrysler Cd changer into the WJ...
--
Mark Price
Morgantown, WV
1969 AMC Rambler, 4.0L, EFI, T-5
" I was different before people dared to be different"
-------------- Original message ----------------------
From: Tom Jennings <tomj@xxxxxxx>
> The twin stick knobs on my American were shot, all stripped out. I've been
> unable to find a replacement for the one with the pushbutton.
>
> But MSC Direct (www.mscdirect.com) has "phenolic ball knobs" that work. One
> just screws on to the 5/8-18 thread (#00583740, $1.53 each) but is 2"
> diameter. The original is 1.5".
>
> They have 1.5" balls, but not with 5/8-18 thread. You could bore one out
> and tap it yourself, the tap will cost more than the balls! The catalog
> page URL is below.
>
> They have red ones too!
>
> I made one of the 2" jobs into the "Twin Stick" ball with the pushbutton,
> it took about 20 minutes. I located the top center of the ball, drilled a
> 1/8" pilot hole down into the tapped cavity. Chucked up a big (1") drill
> bit and used the 118 degree tip to make the depression (no pic here, but if
> you have Twin Stick you know what I mean; pics in the TSM). Then I bored it
> out for the button itself, I think it was letter U drill.
>
> This leaves too much meat for the button to protrude; so I drilled some
> plastic out of the bottom of the tapped cavity with a 5/8" bit til it
> "looked right" poking through the top. Drill, test, drill, test...
>
> OK, but with a 2" ball the button doesn't reach the switch mechanism. I
> simply cut a short length of rigid plastic to the length to make up the
> difference.
>
>
> I also bought balls of other sizes to replace all the knobs in the car with!
>
> Catalog page:
>
> <http://www1.mscdirect.com/CGI/NNPDFF?PMPAGE=1209&PMITEM=00583492&PMCTLG=00>
>
> _______________________________________________
> Amc-list mailing list
> Amc-list@xxxxxxxxxxxx
> http://www.amc-list.com/mailman/listinfo/amc-list
_______________________________________________
Amc-list mailing list
Amc-list@xxxxxxxxxxxx
http://www.amc-list.com/mailman/listinfo/amc-list
Back to the Home of the AMC Gremlin