Re: [Amc-list] 4 speed Automatic 2wd Aisin Warner Trannies
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Amc-list] 4 speed Automatic 2wd Aisin Warner Trannies



It's dirt simple to make a controller to place the trans in 1st or second and get it to hold.
It's totally electronic. A couple of switches will do the trick.
Frank uses a rotary in his with no TCU.
You might want to use some diodes to keep from backfeeding the tcu.


--
Mark Price
Morgantown, WV
1969 AMC Rambler, 4.0L, EFI, T-5
" I was different before people dared to be different" 

 -------------- Original message ----------------------
From: adh@xxxxxxxxxxxxxxxxx (Sandwich Maker)
> " From: Brien Tourville <hh7x@xxxxxxxxxxx>
> " 
> " From: adh@xxxxxxxxxxxxxxxxx (Sandwich Maker)
> " 
> " " From: Brien Tourville <hh7x@xxxxxxxxxxx>
> " " 
> " " 
> " " 
> " " 
> " " 
> " " Install a 2wd Aisin Warner 4speed Automatic from an '88-'89 Cherokee
> " " that uses the 'stand alone' TCM - transmission control module.
> " 
> " stand alone tcm were used up to '95.  the '96-up obdII ecm
> " incorporated tcm control; the tranny itself was the same.
> " ________________________________________________________________________
> " Andrew Hay                                  the genius nature
> " 
> " 
> " 
> " 
> " ===.===
> " 
> " 
> " Thanks Andrew !
> " 
> " I was being 'conservative' on my years estimates - 
> " am suprised the 'stand alone TCM' ran up thru 1995 !
> 
> actually we may both be wrong!  just saw this:
> 
> ' To: <XJOG@xxxxxxxxxxxxxxx>
> ' From: "Chris Lawson"
> ' Date: Fri, 22 Jun 2007 09:30:54 -0700
> ' Subject: RE: [XJOG] Re: Brand new AW4 trans control module for sale
> ' 
> ' 
> ' 
> ' The AW4 was never integrated into the ECM/PCM.  It's still a seperate module
> ' but it moved over to the drivers side above the go pedal with the change to 
> OBDII.
> ' 
> ' 1998 was a bit of a change over year for the AW4 tranny and TCU.  A front
> ' input speed sensor was added to the tranny and the rear sensor changed a bit.
> ' This should work on 98 and up, but the best bet is to match the color of the
> ' connector which changed color and shape with the change.
> 
> " I've driven these - they last a good long time and
> " shift great.
> 
> my gf has an '01 xj with one.  my only complaint [besides preferring
> sticks] is that it doesn't have separate 1 and 2 detents, because
> there are several times i've wanted to hold it in 2nd, but if i slow
> to below 25 it slams into 1st then won't upshift.
> 
> since this is an electronic box, in principle it should be easy to
> make a substitute that does what i want.  dunno how the column handles
> detents, but gms with the saginaw have p-r-n-d-3-2-1 patterns...
> ________________________________________________________________________
> Andrew Hay                                  the genius nature
> internet rambler                            is to see what all have seen
> adh@xxxxxxxxxxxxxxxxx                       and think what none thought
> _______________________________________________
> Amc-list mailing list
> Amc-list@xxxxxxxxxxxx
> http://www.amc-list.com/mailman/listinfo/amc-list

_______________________________________________
Amc-list mailing list
Amc-list@xxxxxxxxxxxx
http://www.amc-list.com/mailman/listinfo/amc-list


Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated