Re: [Amc-list] breaks

[Tom Jennings <tomj@xxxxxxx>]

On Mon, 14 May 2007, Wrambler242@xxxxxxxxxxx wrote:

> Once you kill the rust good, You can use eastwoods rust encapsulater on the bare surface.
> Get the red, it's basically the same stuff as Bridge paint! Brush it on, two coats, let it dry good between coats, follow directions. You can then sand it off till you get it smooth. If you have pits left over you can recoat with eastwood till they are filled. Then topcoat it with a DP90 type satin black and it will just look like a faded old car!!! If that's the look your after.

I got the black. The red stuff is probably better, but laziness
won out :-)

_______________________________________________
Amc-list mailing list
Amc-list@xxxxxxxxxxxx
http://www.amc-list.com/mailman/listinfo/amc-list