Re: [AMC-List] 232 Trans into a '64 American..

[adh@xxxxxxxxxxxxxxxxx (Sandwich Maker)]

" From: "Jerijan" <jerijan@xxxxxxxxxxxx>
" 
" I have just completed the trans conversion from a larger/later (1970 Hornet) transmisison.
" You are correct...the Yoke MUST be changed.
" []
" He took the larger yoke from the larger car's tranny (This is the
" yoke onto the output shaft...the baby one from the '64 is splined
" differently), cut both off their respective drive shafts, and
" rewelded, balanced it unto the American's (Mine is a '65).

non-big-nut americans use the same u-jiunts as hornets etc up to the
mid '70s at least.  you'd probably still need a custom driveshaft
because the new tranny's length is likely different from your old one.
________________________________________________________________________
Andrew Hay                                  the genius nature
internet rambler                            is to see what all have seen
adh@xxxxxxxxxxxxxxxxx                       and think what none thought
_______________________________________________
AMC-List mailing list
AMC-List@xxxxxxxxxxxx
http://www.amc-list.com/mailman/listinfo/amc-list

or go to http://www.amc-list.com