Re: AMC model 20 posi carriers (revisited)
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: AMC model 20 posi carriers (revisited)
- From: Ken Ames <amesk@xxxxxxxxxxxxxxxxxxxxxx>
- Date: Fri, 1 Oct 2004 17:31:49 -0600
You're probably right. It's just that the only 2 I have both came from
Concords so I guess that clouded my memory.
Ken Ames
Quoting "" <TABunsey@xxxxxxx>:
> On October 1, 2004 Ken Ames wrote:
>
> > Perhaps I should amend that to Concord and Spirit 304s.
> >
> > Ken Ames
> >
> > Quoting Ken Ames <amesk@xxxxxxxxxxxxxxxxxxxxxx>:
> >
> > > The only cars that had the Model 20 with a 2.56:1 ratio were the 79
> Concord
> > > 304s. AFAIK.
> > >
> > > Ken Ames
>
>
> Yes, you should. But, you forgot V8 Pacers.
>
> I didn't say that they were common, but they WERE available. Just not in
> posi.
>
> I have a 2.56 (Non-Posi, of course) Ring & Pinion (and appropiate carrier) in
> a 1968 American V8 rear end. I put it together over ten years ago for a V8
> American project that I later abandoned; the rear end is still sitting in my
> pole barn. A 1978 304 Pacer was the donor vehicle.
>
> No, there is not an AMC posi carrier available for the 2.56 ratio. But I was
> discussing the ratios that AMC put in cars (stock) and I thought that I would
> list ALL originally equipped ratios.
>
> Tom Bunsey
>
>
>
>
>
>
> > >
> > > AMCA = http://clubs.hemmings.com/amcalberta/
> > >
> > > Quoting Joe <jgray_55@xxxxxxxxx>:
> > >
> > > > OK, So how the heck do you tell which carrier fits
> > > > what gear ratio by looking at them? Theres one on
> > > > ebay, and i also know another fellow who has two
> > > > center carriers he's sell me, possibly from old Ambos
> > > > if he remembered correct? His do have the original
> > > > ring gears still attached i think, would that help
> > > > identify them? Wish AMC carriers were as easy as old
> > > > ford 9" ! All of them(as long as you stay either 28 or
> > > > 31 spline)will interchange, as long as you have the
> > > > correct side bearing size(only two sizes were
> > > > available in each axle spline). HELP ???
>
> =============================================================
> Posted by wixList Archiver -- http://www.amxfiles.com/wixlist
>
>
>
>
>
-------------------------------------------------
This mail sent through IMP: http://horde.org/imp/
Back to the Home of the AMC Gremlin