Re: [BaadAssGremlins] 360 Engine for the Gremlin
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [BaadAssGremlins] 360 Engine for the Gremlin





There are a lot of things to consider when choosing a cam, Are you looking for HP / Torque / Streetable or full race / transmission type, and gear ratio. 
I myself went with a Comp Cam Grind Number 287TH7  Here a link to the specs http://www.compcams.com/Company/CC/cam-specs/Details.aspx?csid=1448&sb=0
 
I'm running a 401 with 10:1 compression with Edelbrock Aluminum Heads and a 4speed and 3.70 rear gears.
 
I would give the folks at Comp Cams a call and they will help you choose a cam that will best suit your needs
 
Good luck
Ed

--- On Wed, 9/19/12, grublinx <crbacsw@xxxxxxx> wrote:

From: grublinx <crbacsw@xxxxxxx>
Subject: [BaadAssGremlins] 360 Engine for the Gremlin
To: BaadAssGremlins@xxxxxxxxxxxxxxx
Date: Wednesday, September 19, 2012, 7:05 PM

 
Got myself a great deal on an 80's era 360 that was bored .40 over less than 4,000 miles ago. Looking for recommendations regarding a cam and flat top pistons. Thoughts?



__._,_.___


Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___


Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated