Re: [BaadAssGremlins] Re: Ignition points setting

[Terry Atkins <twa1950@xxxxxxxxx>]

Just remember when you are sitting the points you set them when they are on the high side.

--- On Mon, 5/14/12, Ed Veneck <edveneck@xxxxxxxxx> wrote:

From: Ed Veneck <edveneck@xxxxxxxxx>
Subject: Re: [BaadAssGremlins] Re: Ignition points setting
To: "BaadAssGremlins@xxxxxxxxxxxxxxx" <BaadAssGremlins@xxxxxxxxxxxxxxx>
Date: Monday, May 14, 2012, 8:53 PM

 

Points aren't that difficult to set.  If you set the gap at .019 and your motor won't start, I would start checking other items in the system.  Does it have spark, and if it does is it a bright blue spark or kind of weak.  either of these could be the coil or condenser. Are your plugs and wires in good shape.  Is your timing correct?  Just start with the simple basics stuff, and I bet you fine the problem.

Ed

From: Pj <pjtheurer@xxxxxxxxx>
To: BaadAssGremlins@xxxxxxxxxxxxxxx
Sent: Monday, May 14, 2012 9:30 AM
Subject: [BaadAssGremlins] Re: Ignition points setting

 

ok, .016 it is....

now, what about this "dwell setting" I dont have a dwell meter, and im trying to get this thing running again... I messed with the points and now it wont start..

sure wish there was an hei style distributor I could drop in and make all these point issues go away..

guess thats why I love my GMs. my 72 Riv was easy, drop in the HEI, run a new power lead to it and set the base timing..

my ears are open, whatcha got guys?

Paul J. Theurer

R.O.A. Member # 12474

1971 AMC Hornet Sportabout 232 IL6, factory air, white vinyl reclining buckets and more im sure I'm forgetting

1972 Buick Riviera "Rachael" w/a (1968) Built 430 Cu. In. Bucket seats, full console, rear defog, climate control, trip set/ speed alert.... and more...

1994 Buick Roadmaster "Roadie" LT1 5.7 L. OBD1, ruby red leather, power windows, door locks,

~~Buick- Fast with Class~~

"Understeer is when you hit the wall with the front of the car and oversteer is when you hit the wall with the rear of the car. Horsepower is how fast you hit the wall, torque is how far you take the wall with you." --Anonymous"

--- In BaadAssGremlins@xxxxxxxxxxxxxxx, Dave Tuck <davesdocs@...> wrote:
>
> Its 16 thou (0.016). A hacksaw blade thickness (approx) will get you going. Doubt it would run at 34. Sparkplugs are that gap.
>
> --- On Sun, 13/5/12, Bradley Jones <wagonmasterx5@...> wrote:
>
>
> From: Bradley Jones <wagonmasterx5@...>
> Subject: Re: [BaadAssGremlins] Ignition points setting
> To: "BaadAssGremlins@xxxxxxxxxxxxxxx" <BaadAssGremlins@xxxxxxxxxxxxxxx>
> Received: Sunday, 13 May, 2012, 7:41 AM
>
>
>
>  
>
>
>
>
>
> Not sure. We always used a matchbook cover to set them.
>
>
>  
>  
>
>
>
>
>
> From: Pj <pjtheurer@...>
> To: BaadAssGremlins@xxxxxxxxxxxxxxx
> Sent: Saturday, May 12, 2012 12:01 PM
> Subject: [BaadAssGremlins] Ignition points setting
>
> initial point gap should be between 31-and 34, correct? its been so long since i set-up points on one of these I've forgotten.
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>

 

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___