[BaadAssGremlins] Fw: COMPRESSION RATIO
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[BaadAssGremlins] Fw: COMPRESSION RATIO





Allen below is looking for some advise and if anyone wishes to chime in, please feel free to reply it woul dbe appreciated, be sure to copy your reply to him and thanks in advance to all who might reply.
Eddie Stakes
713.464.8825
eddiestakes@xxxxxxxxxxxxxxxxxxxx
www.planethoustonamx.com
----- Original Message -----
 

 HI EDDIE,I HOPE YOU CAN ENLIGHTEN ME TO A ESTIMATE OF 401 COMPRESSION WITH THE 1970 HEADS,UNFLOWED AND IF MEMORY SERVES ME CORRECTLY I'M RUNNING THE 103 THOUSANDTH SHALLOW DISH CAST PISTONS.I HAVE TO PULL MY MOTOR DOWN AS IT DEVELOPED A KNOCK DUE TO OIL PRESSURE DROPPING ON ACCELERATION. I DONE OIL LINE MODS AND WENT THROUGH THIS ENGINE WITH A FINE TOOTH COMB. ALL BALANCED AND NEW INSIDE AND OUT.GRRR. I'M THINKING I'LL PROBABLY FIND A MISSING PICKUP TIP I OVERLOOKED.I WOULD LIKE TO THINK I CAN GET 400+H.P. CURRENTLY USING 504 LIFT CAM,TORKER,750 HOLLEY,ROLLER ROCKERS,PORT MATCH,MALLORY DUAL POINT,AND STOCK PAN.MAY GO TO DEEP PAN IF CASH ALLOWS.  THANK YOU VERY MUCH FOR YOUR TIME,ALLEN ROBERTSON.


__._,_.___


Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___


Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated