Re: [BaadAssGremlins] Re:tach wiring harness [1 Attachment]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [BaadAssGremlins] Re:tach wiring harness [1 Attachment]



[Attachment(s) from Eddie Stakes included below]

Hi Tom, this is a factory illustration of Gremlin tachometer for 1971, 74 should be same, however as with all 1974's they have more wiring than other years due to the damned Sealt Belt Interlock System you know, so could be slightly different, but see attached jpeg, hope this helps perhaps.
Eddie Stakes
713.464.8825
eddiestakes@xxxxxxxxxxxxxxxxxxxx
www.planethoustonamx.com
----- Original Message -----
From: Tom Tente
Sent: Monday, January 18, 2010 5:37 PM
Subject: [BaadAssGremlins] Re:tach wiring harness

I looking for some information. I have 1974 gremlin 6 cly Just purchased a dash cluster with a tach . Is there a special harness that I need to hook it up. I took a wire from the tach side of the dist. hooked that to the neg side of the tach and the pos. side to batt. and it stalled the engine not sure theres a special harness or the tach is shorted   Thank you  Tom Tente


Attachment(s) from Eddie Stakes

1 of 1 Photo(s)


__._,_.___


Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___


Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated