They do look the same but where the Hornet has one bolt in between the bumper rubber pieces the Gremlin has three. Then on the bottom of the bumper the Gremlin has four bolts while the Hornet has two. I am not concern that it has less bolts I just wonder if the holes would match up. I would guess they would. Question the spun aluminum ones on say the Spirits are they just held on by the rubber bumper guards.
Terry
--- On Sun, 8/23/09, Eddie Stakes <eddiestakes@xxxxxxxxxxxxxxxxxxxx> wrote:
From: Eddie Stakes <eddiestakes@xxxxxxxxxxxxxxxxxxxx>
Subject: Re: [BaadAssGremlins] gremlin rear bumper wanted
To: BaadAssGremlins@xxxxxxxxxxxxxxx
Cc: marrob@xxxxxxxxxxxxxxxxx
Date: Sunday, August 23, 2009, 9:32 AM
that rear bumper appears to be same as used from 1973 thru 77 Hornets, including AMX
also used on 78-79 Concords and 74-78 Gremlins. Big wraparound heavy thing with steel reinforced inside it, chrome usually good but steel usually rotted as was left natural and not treated so exposed to elements in different climes
----- Original Message -----
Sent: Saturday, August 22, 2009 10:21 PM
Subject: RE: [BaadAssGremlins] gremlin rear bumper wanted
Check out my posted ads on the Reno/Tahoe Craigslist – I posted all on July 28 and they all start out with “Parting a…” Several of the parts cars have good rear bumpers.
Michael Lakin
Fallon, NV. 89406
(775) 427-2695
amcowner@cccomm. net
From: BaadAssGremlins@ yahoogroups. com [mailto:BaadAssGrem lins@yahoogroups .com] On Behalf Of Terry Atkins
Sent: Saturday, August 22, 2009 8:16 PM
To: BaadAssGremlins@ yahoogroups. com
Subject: Re: [BaadAssGremlins] gremlin rear bumper wanted
Can you post a picture of it. I am thinking it is different but I am not sure. I bought one off e-bay a few years ago The bumper was suppose to be in great shape. It isn't rusted like most and the chrome is still decent. Only problem is some idiot had bolted a trailer hitch on to it and there was a big dent in it. I could have lived with the holes but I couldn't figure out how to get the dent out. The one I have is rusted out.. I have white reflecting tape on it. While it doesn't look that bad and it shows up at night it still doesn't look that good either. If you know what I mean.
From: Hal <strlcuckoo_46@ yahoo.com>
Subject: Re: [BaadAssGremlins] gremlin rear bumper wanted
To: BaadAssGremlins@ yahoogroups. com
Date: Saturday, August 22, 2009, 9:21 PM
I have one off a 76(I think) Hornet but the shipping could be bad..
<strong><em><u><font face="comic sans ms" color="#ff00ff">Lost in Wichita Falls, TX</font></u></em></strong>
From: Terry Atkins <twa1950@yahoo. com>
To: BaadAssGremlins@ yahoogroups. com
Sent: Saturday, August 22, 2009 4:35:03 PM
Subject: Re: [BaadAssGremlins] gremlin rear bumper wanted
All I can say is good luck. I have been looking for one for years,
Terry
--- On Sat, 8/22/09, Eddie Stakes <eddiestakes@ planethoustonamx ..com> wrote:
From: Eddie Stakes <eddiestakes@ planethoustonamx ..com>
Subject: [BaadAssGremlins] gremlin rear bumper wanted
To: baadassGremlins@ yahoogroups. com, amc-list@amc- list.com
Cc: marrob@consolidated .net
Date: Saturday, August 22, 2009, 3:13 PM
The folks below are looking for a rear bumper for 77-78 Gremlin, which if I recall,
interchanges with several years Hornet & Concord series also, if you have one or can point
them in right direction please feel free to reply and thanks in advance to all who do,
their information email is down below.
Eddie Stakes
713.464.8825
eddiestakes@ planethoustonamx .com
www.planethoustonam x.com
------------ --------- --------- --------- --------- --------- -
Dear eddie,
Eddie I am looking for a rear bumper for a 77-78 gremlin. If you might have
one or know of one. Any help is appreciated.
marrob@consolidated
.net <marrob@consolidated ..net> |
|
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.409 / Virus Database: 270.13.64/2318 - Release Date: 08/22/09 06:06:00
|
Back to the Home of the AMC Gremlin