[BaadAssGremlins] Re: 727/904 kickdown linkage

["z_man401" <z_man401@xxxxxxxxx>]

Mike

Thanks for your help..
What would be awesome would be a high resolution picture of your setup
i cant really figure out how that bracket is used in relation to the kickdown..  I unless the cable just goes through the top hole?
i might as well order both.


  My self i am finally putting in my correctly rebuilt 401..Up until now my stuff has been junkyard stuff. and mildly overhauled.. I have been waiting about 4 years for this engine to be done.. it was completed a year ago but i have been waay to busy to put it in..
So next week depending if i can get a stall at the local auto hobby shop will be the week of truth..  So i am hoping for the best....

  Thanks alot for your help

I have a plane to catch in the morning

Rob



--- In BaadAssGremlins@xxxxxxxxxxxxxxx, "AMCOWNER" <amcowner@...> wrote:
>
> I don't know why you could not use the kickdown without the throttle linkage
> - not sure about not using the bracket though???
> 
>  
> 
> -Mike
> 
>  
> 
> Michael Lakin
> 
> Fallon, NV. 89406
> 
> (775) 427-2695
> 
> amcowner@...
> 
>  
> 
>  
> 
>  
> 
> From: BaadAssGremlins@xxxxxxxxxxxxxxx
> [mailto:BaadAssGremlins@xxxxxxxxxxxxxxx] On Behalf Of z_man401
> Sent: Monday, June 22, 2009 6:46 PM
> To: BaadAssGremlins@xxxxxxxxxxxxxxx
> Subject: [BaadAssGremlins] Re: 727/904 kickdown linkage
> 
>  
> 
> 
> 
> 
> 
> 
> Can the kickdown linkage just be used by itself? or do you absolutely need
> throttle and throtle cable bracket? If u want contact me off the list.
> 
> z _ man 4 0 1@xxxxxxxxx <mailto:1%40yahoo.com>  <<< that is to fool bot
> spammers
> 
> thanks
> 
> Rob
> 
> --- In BaadAssGremlins@xxxxxxxxxxxxxxx
> <mailto:BaadAssGremlins%40yahoogroups.com> , "AMCOWNER" <amcowner@>
> wrote:
> >
> > The three part numbers are:
> > 
> > 
> > 
> > LOKAR:
> > 
> > 
> > 
> > TC-1000HT36 (Hi-tech Throttle Cable)
> > 
> > SRK-4000 (Stainless Stel Throttle Cable Brkt & Springs)
> > 
> > KD-2904HT (Hi-tech Chrysler 904 Kickdown Kit)
> > 
> > 
> > 
> > The cables are cut to fit and adjust.
> > 
> > 
> > 
> > -Mike
> > 
> > 
> > 
> > Michael Lakin
> > 
> > Fallon, NV. 89406
> > 
> > (775) 427-2695
> > 
> > amcowner@
> > 
> > 
> > 
> > 
> > 
> > From: BaadAssGremlins@xxxxxxxxxxxxxxx
> <mailto:BaadAssGremlins%40yahoogroups.com> 
> > [mailto:BaadAssGremlins@xxxxxxxxxxxxxxx
> <mailto:BaadAssGremlins%40yahoogroups.com> ] On Behalf Of z_man401
> > Sent: Monday, June 22, 2009 6:28 PM
> > To: BaadAssGremlins@xxxxxxxxxxxxxxx
> <mailto:BaadAssGremlins%40yahoogroups.com> 
> > Subject: [BaadAssGremlins] Re: 727/904 kickdown linkage
> > 
> > 
> > 
> > 
> > 
> > 
> > 
> > 
> > 
> > thanks for the info... does the lokar stuff just drop in or do you have to
> > mod it alittle? All i really need is that darn screw how much and do you
> > except paypal lol...
> > 
> > Rob
> > 
> > --- In BaadAssGremlins@xxxxxxxxxxxxxxx
> <mailto:BaadAssGremlins%40yahoogroups.com> 
> > <mailto:BaadAssGremlins%40yahoogroups.com> , "AMCOWNER" <amcowner@>
> > wrote:
> > >
> > > Lokar throttle and kick down cables for 727 work great - I have their
> > setup
> > > on my 69 Javelin with 401 and 727 and my 73 Hornet with 258 and 998.
> > > 
> > > I have several AMC parts cars and probably have the parts you need if
> you
> > > want to stay stock.
> > > 
> > > 
> > > 
> > > -Mike
> > > 
> > > 
> > > 
> > > Michael Lakin
> > > 
> > > Fallon, NV. 89406
> > > 
> > > (775) 427-2695
> > > 
> > > amcowner@
> > > 
> > > 
> > > 
> > > 
> > > 
> > > 
> > > 
> > > From: BaadAssGremlins@xxxxxxxxxxxxxxx
> <mailto:BaadAssGremlins%40yahoogroups.com> 
> > <mailto:BaadAssGremlins%40yahoogroups.com> 
> > > [mailto:BaadAssGremlins@xxxxxxxxxxxxxxx
> <mailto:BaadAssGremlins%40yahoogroups.com> 
> > <mailto:BaadAssGremlins%40yahoogroups.com> ] On Behalf Of z_man401
> > > Sent: Monday, June 22, 2009 6:10 PM
> > > To: BaadAssGremlins@xxxxxxxxxxxxxxx
> <mailto:BaadAssGremlins%40yahoogroups.com> 
> > <mailto:BaadAssGremlins%40yahoogroups.com> 
> > > Subject: [BaadAssGremlins] 727/904 kickdown linkage
> > > 
> > > 
> > > 
> > > 
> > > 
> > > 
> > > 
> > > 
> > > Anybody have any spare fasteners that connect the carburator to the
> > > linkage.. Mine unfortunately vibrated out and i am unable to locate my
> > > spare(if it ever exhisted)..
> > > Also will the LOKAr 727 linkage work on our stuff? The seam to push the
> > > Mopar only....
> > > 
> > > Rob Zabawa
> > > 
> > > 
> > > 
> > > No virus found in this incoming message.
> > > Checked by AVG - www.avg.com
> > > Version: 8.5.339 / Virus Database: 270.12.83/2191 - Release Date:
> 06/22/09
> > > 06:54:00
> > >
> > 
> > 
> > 
> > No virus found in this incoming message.
> > Checked by AVG - www.avg.com
> > Version: 8.5.339 / Virus Database: 270.12.83/2191 - Release Date: 06/22/09
> > 18:11:00
> >
> 
> 
> 
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 8.5.339 / Virus Database: 270.12.83/2191 - Release Date: 06/22/09
> 18:11:00
>




------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/BaadAssGremlins/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/BaadAssGremlins/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:BaadAssGremlins-digest@xxxxxxxxxxxxxxx 
    mailto:BaadAssGremlins-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/