RE: [BaadAssGremlins] Gremlin almost done, need wheel advice

[Rick Griffin <amc_poppy@xxxxxxxxx>]

I cant feel it if there is a weight difference. But the only ones I have had are 4" wide. I like the way they are one piece and dont rattle when off the car' also they are one bolt pattern
only -no extra holes--- On Thu, 6/4/09, Davis Martin <martin-davis@xxxxxxxxxxxxx> wrote:

From: Davis Martin <martin-davis@xxxxxxxxxxxxx>
Subject: RE: [BaadAssGremlins] Gremlin almost done, need wheel advice
To: BaadAssGremlins@xxxxxxxxxxxxxxx
Date: Thursday, June 4, 2009, 9:09 AM

I always wondered if the summit brand were any heavier. I need to get a new set of 15X10's with 6" BS for my Grem.

 I have very little cash though. I ahve been looking 4 used but not alot out there in a 6" BS

 Davis

--- On Wed, 6/3/09, Rick Griffin <amc_poppy@yahoo. com> wrote:

From: Rick Griffin <amc_poppy@yahoo. com>
Subject: RE: [BaadAssGremlins] Gremlin almost done, need wheel advice
To: BaadAssGremlins@ yahoogroups. com
Date: Wednesday, June 3, 2009, 11:32 PM

For heavens sake before you spend big bucks for Weld wheels look at the summit brand that are almost exactly the same look . A set of 15x4 for the front at $89.95 each and 15x8 for $99.95 each. What a deal! We are running Weld 15x14s on the rear and summit 15x4 on the front of a 74 Gremlin X. Looks great together.

--- On Wed, 6/3/09, DANIEL PETERS <danpeters1@msn. com> wrote:

From: DANIEL PETERS <danpeters1@msn. com>
Subject: RE: [BaadAssGremlins] Gremlin almost done, need wheel advice
To: baadassgremlins@ yahoogroups. com
Date: Wednesday, June 3, 2009, 9:13 PM

I have American Racing Torque Thrust D's on mine they look great and fit the style and era.  I got them from summit.  there are other versions of the torque thrusts that you may like better.

Daniel J. Peters


 

---

To: BaadAssGremlins@ yahoogroups. com
From: nfsjunk@hotmail. com
Date: Thu, 4 Jun 2009 00:27:19 +0000
Subject: [BaadAssGremlins] Gremlin almost done, need wheel advice

First post, but have been lurking for a long time here...

I am just about finished with my 1972 Gremlin X. I have a fresh 401 that just put 303HP/335LB at the wheels on the dyno and the car looks exactly like the magazine ad for 1972 (purple w/gold stripes). Even though I love the sleeper look with the stock wheels I want to get a nice set of Weld Racing wheels to make it look just like this..

http://huntertrek. com/wp/wp- content/uploads/ 2008/01/72gremli n.jpg

I am assuming that these are 15" rims and its obvious that the fronts are 3.5, but does anybody here have advice on what those rears might be? 8"?? I want them to fit under the wheel wells just like that car.

While I'm making requests.... anybody here have an idea on backspacing?

Thanks in advance for any advice.

Nate

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___