[BaadAssGremlins] Fw: Pinion seals questions

["Eddie Stakes" <eddiestakes@xxxxxxxxxxxxxxxxxxxx>]

Bob has a question about some pinion seals, if anyone cares to comment 
please feel free to do so, and thanks in advance that all who might. Be sure 
to copy your reply also directly to Bob at schrh@xxxxxxxx    thanks again,
Eddie Stakes
713.464.8825
eddiestakes@xxxxxxxxxxxxxxxxxxxx
www.planethoustonamx.com

----- Original Message ----- 
From: "Bob Schilling" <schrh@xxxxxxxx>

Subject: Pinion seals


> Eddie,
>        I had a couple of seals I was trying to identify and you did
> it!!! Thanks. But Im confused.... The CR 18912 is listed for the 1 3/4
> pinion and the CR 18708 is listed for both the 1 7/8 AND 1 3/8 pinion.
> How can the 18708 fit 2 different diameter shafts?????  Is there that
> much "play" in the seals  ( I noticed the Chrysler # is the same for all
> 3?????).... Thx, Bob
> ____________________________________________________________



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/BaadAssGremlins/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/BaadAssGremlins/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:BaadAssGremlins-digest@xxxxxxxxxxxxxxx 
    mailto:BaadAssGremlins-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/