Re: [BaadAssGremlins] bell housing

[Todd Tomason <jayscore@xxxxxxxxxxxxx>]

Sorry, I messed up.  That should have been 72 and later have the same bolt 
pattern.  You'll see the old bolt pattern on 199's, early 232's, and early 
258's.  (It's just one or two years on the 258's.  I can't remember if the 
258 was introduced in 70 or 71.)  

Todd

On Friday 13 June 2008 08:30, Davis Martin wrote:
> Yes very true. the 199 6 had a different pattern.
>    Davis
>
> Todd Tomason <jayscore@xxxxxxxxxxxxx> wrote:
>           It also depends on the year. The bolt pattern is the same for 71
> and later. 70 and earlier the 6 used a different bolt pattern.
>
> Todd
>
> On Thursday 12 June 2008 23:06, Davis Martin wrote:
> > Same bolt pattern but possibly different depth. Crossmember should be the
> > same though. Davis
> >
> > Tim Braswell <braswell@xxxxxxxx> wrote:
> > Are the 6 and 8 cylinder manual bell housings the same and the
> > rear crossmember, Thanks Tim

------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/BaadAssGremlins/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/BaadAssGremlins/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:BaadAssGremlins-digest@xxxxxxxxxxxxxxx 
    mailto:BaadAssGremlins-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/