[BaadAssGremlins] Re: My Disc Brake Conversion Story
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[BaadAssGremlins] Re: My Disc Brake Conversion Story



Hal you wouldn't believe 
the mess of lines needed 
to install a stock type 
valve. And once installed 
after all that work you 
won't know if it will 
work. I made a bracket 
that bolts to the two the 
master cyl studs and 
mounted the Willwood valve 
right there next to the 
master. It was only a 
minimum of brake line work 
to install it. Since I set 
the valve in the middle it 
was in netrual and never 
needed to adjust it so I 
really didn't need it at 
all. Yes the chrome 
arrived in fine shape. I 
thought I had told you 
that. Sorry if I didn't.
"Doc"   



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/BaadAssGremlins/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/BaadAssGremlins/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:BaadAssGremlins-digest@xxxxxxxxxxxxxxx 
    mailto:BaadAssGremlins-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/



Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated