----- Original Message -----
Sent: Sunday, April 13, 2008 3:10
PM
Subject: Re: [BaadAssGremlins] Fw: Car is
done but slow off the line also engine noise start up
Its a mild lenati voodoo cam which is a 64501 standar base
circle 484 intake lift 507 lift on exhaust: Duration 213.050 on intake.
Duration on exhast is 220.050. Lobe separation 112. Cam installed 0
strait up. Has Headers has a EDL performer rpm air intake.
The car has a quick fuel 650 double pumper (similar to holley just shiny and
has glass ports to see fuel. It has a 2500 stall converter on the 1972
727 tranny. Its a dog out of the hole even if you power brake but comes
alive at 3000 to 3500 rpms. I also ended up with a stranger
problem. when I first got this new motor back it made a metal to metal
lifter noise (lifter not pumping up tappin noise) at first it only did
this in initial start. Now it does it when ever I start motor. unless I
just hsut it of and start it back up. They said the reason It does this
is the cam oling system they put in it bleedes down and has to pump up.
I have a bulltear oil pump plate that blocks the return bypass up. Is
that really usefull or is it causing this probelm. It has a TDK v8
oil kit for timing chain. a MDK oil kit for main bearings. The motor is a 360
from 1970.Rebuilt It has 8.05 to one compression. 4.110
boar. Stainlees steel valves. Has a suplimental oiling kit
according to engine build ticket.
Olly
<mrmopar00@xxxxxxxxx> wrote:
Do you have any camshaft specs?
Olly
Back to the Home of the AMC Gremlin