RE: [BaadAssGremlins] Fw: gremlin/hornet drive axles question
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [BaadAssGremlins] Fw: gremlin/hornet drive axles question



That's what I've always heard too.  There are too many variations, and too 
many people can't measure correctly.  

Todd

On Monday 07 January 2008 10:13, James Shadwick wrote:
> Last I heard you need to ship your axles to Moser to get new ones made.....
>
> http://www.moserengineering.com/index.html
>
> Jim
>
> Petriew, Kelly wrote:
> > Long time no post here either (Hi Everyone).
> >
> > I have a similar question guys, but mine is more specific to the axle
> > shafts themselves. I may have asked this before, but I have an AMC 20
> > with the crappy two pieces. I want to go 1 piece cuz i think one is
> > partially spun.. yes partially..  I haven't had them out yet to inspect,
> > but I think the keyway is broken or compromised somehow. The rear came
> > from a concord wagon. Someone told me that I need to measure and all
> > that stuff before going to Moser or whatever, but I shouldn't have to.
> > Has anyone here swapped axles and if so, what part# and place do I buy
> > from?
> >
> > Thanks in advance
> >
> > ________________________________
> >
> > From: BaadAssGremlins@xxxxxxxxxxxxxxx
> > [mailto:BaadAssGremlins@xxxxxxxxxxxxxxx] On Behalf Of Eddie Stakes
> > Sent: Friday, January 04, 2008 11:15 AM
> > To: baadassgremlins@xxxxxxxxxxxxxxx
> > Cc: KC0MOG@xxxxxx
> > Subject: [BaadAssGremlins] Fw: gremlin/hornet drive axles question
> >
> >
> >
> > The folks below are asking some questions about axles on Gremlin and
> > Hornet and I thought some of you folks might be able to help. Feel free
> > to reply and thanks to all who may, be sure to COPY your reply directly
> > to Jack who would appreciate it also.
> > Eddie Stakes'
> > Planet Houston AMX
> > 713.464.8825
> > eddiestakes@xxxxxxxxxxxxxxxxxxxx
> > <mailto:eddiestakes@xxxxxxxxxxxxxxxxxxxx>
> > www.planethoustonamx.com <http://www.planethoustonamx.com>
> > email reply currently 5-9 days
> > 8-19 day reply times, just call!
> > ----- Original Message -----
> > From: KC0MOG@xxxxxx
> >
> > Hi Eddie, just wondering if you might be able to tell me what is the
> > difference in the drive axles from 70-76 Gremlin/Hornets and the 78
> > model. The salvage yards here keep telling me only 78-83 axles fit my 78
> > gremlin. The only diff I see is the rubber isolator on the 78 and newer
> > and the brakes. Trying to put a model 20 under mine but they keep
> > telling me they wont work since the "book says they didnt have V8's so
> > the model 35 dana is all that fits". Even when I tell them I have a
> > welder and set of perches. Sorry for the ramble/rant but this car has
> > not been driveable for almost 6 months with bent and twisted rear axle
> > housing and I refuse to put another 6 cyl rear in it!. Thanks for any
> > reply.  Jack Ward  KC0MOG@xxxxxx
>
> Yahoo! Groups Links
>
>
>


 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/BaadAssGremlins/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/BaadAssGremlins/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:BaadAssGremlins-digest@xxxxxxxxxxxxxxx 
    mailto:BaadAssGremlins-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 


Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated