[BaadAssGremlins] V8 conversion
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[BaadAssGremlins] V8 conversion



I have a problem with installing the eng/trans into a Gremlin that had 
an original 6 cyc. I got a V8 front crossmember from John Rosa & 
replaced the whole front suspension. After lowering the eng into the 
bay the mounts don't line up & the heads are against the firewall. The 
mounts are on the engine & about 1"-2" in front of the crossmember. Do 
I need to keep moving the engine around to make it fit or did I install 
it wrong? This is my first conversion & I'm stumped. Please help with 
any advice. I am really looking forward to getting the Gremlin on the 
road by Xmas. Thanks, Larry in Florida



 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/BaadAssGremlins/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/BaadAssGremlins/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:BaadAssGremlins-digest@xxxxxxxxxxxxxxx 
    mailto:BaadAssGremlins-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 


Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated