--- In BaadAssGremlins@xxxxxxxxxxxxxxx, "Steve" <skonkle@...> wrote: > > Trying to pull the 232 out of a '78 Gremlin for a rebuild, and running > into some difficulties. > > I can't seem to get the last tranmission bolt off. It is in tight > against the firewall on the top left of the tranmission. The bolt seems > to be a little stripped, and getting a wrench in at the right angle is > a b!7c#. > > Any tips from someone who has ran into this? > I use a swivel and a 9/16" socket and lots of extensions. It is definitly tight! You may need to pull down on the tranny. Davis Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/BaadAssGremlins/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/BaadAssGremlins/join (Yahoo! ID required) <*> To change settings via email: mailto:BaadAssGremlins-digest@xxxxxxxxxxxxxxx mailto:BaadAssGremlins-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/