Re: [BaadAssGremlins] Was Cam Question - now "Beefing up a 304"
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [BaadAssGremlins] Was Cam Question - now "Beefing up a 304"



TCI makes a nice one. You should get a shift kit in that tranny as well. Tiome to do some reading see what you can find on the net to read up on tranny's and converters.
 Davis

GrublinX@xxxxxxx wrote:
In a message dated 11/1/2006 5:08:29 P.M. Eastern Standard Time, martin-davis@xxxxxxxxxxxxx writes:
Charlie,
 When you get your cam swapped in the best advice I can give you is to take your car to a chasis dyno and tune your combination. Also after all that work to the engine you llshould consider a shift kit for the tranny if it is an auto. and get a converter with a bit more stall speed. Say about 2200 RPMs. You should be able to get your gremmie into the low 13's with no trouble.
Davis
There you go, talking about things of which I know nothing!
I did have a Hurst Pro-Matic 2 shifter  put in when I had the tranny serviced.  As for the converter, I did not even know that they were not all created equal. What brand would you recommend?
Charlie
 
Charlie "Cool Factor X"

__._,_.___


SPONSORED LINKS
Automotive advertising Automotive lifts Automotive dealer new car

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___

Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated