Hood...as Davis said the hood was a 1/4 inch or so wide on both sides so it could be sanded down to fit.... it came out very smooth...the only rough place was the lower part of the front turn down..... The guy at the paint shop sanded down mine to fit and drilled the holes for the hold downs..... ....the only thing is the stiff under bracing.....the hood goes straight across and does not curve with the cowl.... looks ok if both are painted...... I like it because the hood does not flex..... Davis.....your new engine looks great....hope the power comes out as you want it to..... Jim -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.405 / Virus Database: 268.12.3/445 - Release Date: 9/11/2006 Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/BaadAssGremlins/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/BaadAssGremlins/join (Yahoo! ID required) <*> To change settings via email: mailto:BaadAssGremlins-digest@xxxxxxxxxxxxxxx mailto:BaadAssGremlins-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/