This may sound like I am off my rocker and just totally off the wall.
Bradley is right about bead blasting off the paint, but I know of a guy who
makes dentures for a living and he recomended to me one time to try crushed
walnut shells instead of glass beads. Low pressure and crushed walnut shells
do wonders for
the plastic and enamel on dentures. Not only does it take off
the glue and crap, but the walnut shells actually polish. I thought of
purchasing his old blaster that he had made, but he wanted to much for it. A
good sheet metal shop can make a small blaster for around 300 to 350 bucks,
depending on the size the more expensive the cost to make one. Sounds crazy
but crushed walnut shells do work also.
Bill Renshaw Lewiston Idaho
AKA Brother B.
As always....Keep on a Ramblin'!!
1973 Gremlin X "clone" (project)
1970 Original Hornet "plain jane"
1974 Matador Coupe "Parts car"
>From: Bradley Jones <
wagonmasterx5@yahoo.com>
>Reply-To:
BaadAssGremlins@yahoogroups.com>To:
BaadAssGremlins@yahoogroups.com>Subject: Re:
[BaadAssGremlins] Stripping paint from plastic Headlight
>doors?
>Date: Sun, 9 Jul 2006 17:22:04 -0700 (PDT)
>
>Does anybody in your area do beadblasting? Not sandblasting. Beadblasting
>can blast the paint from an aluminun soda can without damaging it.
>
>deezildennis <
dsinks@prodigy.net> wrote: Im not sure if I asked
>this yet but I have a Grill that had a horrid
>paint job sometime back in the 80's and its partly flaking and thick!
>The grill itself is good to go I was able to blow the paint off of it
>with 125psi......
.
>
>The Headlight doors Ive chipped/Blown as much of it off as I can but
>the stuff thats stuck.........Is stuck. Sanding is gonna suck and the
>potential to ruin them is great.........
>
>Im wondering if laquer thinner in a spray mist bottle would do
the
>trick.
>
>Any thoughts, Idea's??
>
>
>
>
>
>
>---------------------------------
>Do you Yahoo!?
> Everyone is raving about the all-new Yahoo! Mail Beta.
Back to the Home of the AMC Gremlin