Re: [BaadAssGremlins] Bad Weather, Missing Parts & A Busy Shop Slowing Things Down

[AMC74HORNET@xxxxxxxxx]

Yea this weather has been horrible but at least you have a garage to
work in. Mine is still stuffed full of parts and my son's 74 Javelin and
my orange Hornet. I can barely get in the Hornet to get it out of the
garage.
"Doc"



------------------------ Yahoo! Groups Sponsor --------------------~--> 
Something is new at Yahoo! Groups.  Check out the enhanced email design.
http://us.click.yahoo.com/SISQkA/gOaOAA/yQLSAA/YtqqlB/TM
--------------------------------------------------------------------~-> 

 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/BaadAssGremlins/

<*> To unsubscribe from this group, send an email to:
    BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

--- Begin Message ---

• From: Davis Martin <martin-davis@xxxxxxxxxxxxx>
• Date: Sun, 25 Jun 2006 06:14:38 -0700 (PDT)

Doc,

 I hear ya. I have the same weather up here. I will be going out in a few min to see if I can get a coil of stainless brake line and fittings so I can plumb up my brake system. I did find out the Earls flex lines I have for the rear disks are both streight ends and I have to have a 90 end to clear the wheel, So I will have to send them back to Summit and order the right ones. Then I will have to get an adapter to go from the flex line to the hard line as they have different types of flare on the ends. Then there is the fuel system. No one makes a 90 deg 8 an to 1/2" hard lime so I have to spend another 20 bucks for an adaptor. It will cost me over 100 bucks to install my fuel cell.

 Like you have said a million times, NOTHING is ever easy on an AMC.

 last nigh t before I went to bed I was looking at the pics in my folder and I am kinda proud of my fabrication skills and My car has come a long way from where it started. Granted I have a longer way to finish.

 Davis  

AMC74HORNET@xxxxxxxxx wrote:

The grill is still not back in the car due to the front bumper having to
be removed to install the last mounting bolt in the bracket on the oil
cooler and the electric fan. My friends shop is real busy and he can not
do it right now and I am not physically able any more to remove the
bumper myself. The thermocoupler to automatically operate the fan was
not in the installation kit I bought. It is supposedly on it's way. Will
also be adding a 35 amp switch to the fan to allow it to work on the
thermocoupler or manually on & off. The switch came 2 day's after I
ordered it. I can park the car in front of my friends shop in the shade
to re-do the double factory pin stripe but it was to damn hot last week
and is now raining with a vengeance for probably the next week so that
is out. I cut the letters spelling American Motors out of the dark smoke
window tint for the windshield and made the jig to make a straight
reference line across the windshield to install them but then again the
weather will put the kibosh on that too. I guess I will have to dig out
the AMX fender flairs and pick the best ones and start stripping them so
I can paint them. Damn weather.
"Doc"

--- End Message ---