Re: [BaadAssGremlins] Question about headers for 258

Ya I know...but nothing is cheap now days anyway.... or should I say free....especially when it comes to an inline. I asked Clifford the other day about if they had changed their header style at all in the last 15-20 years and they have. My headers on my Gremlin hang way low...about 3 inches from the ground, I had to weld a small skid plate on the bottom 3 tubes. I have also had to have one of the collectors re-done at a local exaust shop. I am not going to buy a new one, I was just curious. They now dump about 1 inch below where the pan and block come together. Cliffords responce was that they were having complaints about clearence problems....GO FIGURE!! I've been bitchen about them since I put the things on!!! LOL!! But, I still think that they are cool....I like the look of a car coming at ya and ya can see the headers hangin' low. Bill Id.

From: Davis Martin <martin-davis@xxxxxxxxxxxxx>
Reply-To: BaadAssGremlins@xxxxxxxxxxxxxxx
To: BaadAssGremlins@xxxxxxxxxxxxxxx
Subject: Re: [BaadAssGremlins] Question about headers for 258
Date: Fri, 31 Mar 2006 07:04:49 -0800 (PST)

I was talkin on the cheap with no power adders Davis William Renshaw <lionwren@xxxxxxxxxxx> wrote: Well ya of course you could....Paxton super charger!! Even if you could get one to bolt to an intake I dont think it would even come close.... but that would be just BITHCIN'!! Bill Id. From: Davis Martin <martin-davis@xxxxxxxxxxxxx> Reply-To: BaadAssGremlins@xxxxxxxxxxxxxxx To: BaadAssGremlins@xxxxxxxxxxxxxxx Subject: Re: [BaadAssGremlins] Question about headers for 258 Date: Fri, 31 Mar 2006 06:35:14 -0800 (PST) Makin 400 HP from a basically stock 360.....Easy ask me how... makin 400 HP from a 258 ???......not so easy. Davis William Renshaw <lionwren@xxxxxxxxxxx> wrote: DONT THINK....JUST DO IT AND GET-R-DONE!! LOL!! From: "Charles Burch" <warlocke@xxxxxxxxx> Reply-To: BaadAssGremlins@xxxxxxxxxxxxxxx To: <BaadAssGremlins@xxxxxxxxxxxxxxx> Subject: Re: [BaadAssGremlins] Question about headers for 258 Date: Thu, 30 Mar 2006 23:32:43 -0600 lol yes i am thinkin bout swaping but not 100% on that ----- Original Message ----- From: William Renshaw To: BaadAssGremlins@xxxxxxxxxxxxxxx Sent: Thursday, March 30, 2006 11:16 PM Subject: Re: [BaadAssGremlins] Question about headers for 258 Charles you still thinkin' about swappin' out?? Believe me on one thing...If I had known it was going to cost so much for all the crap on mine....I would of swapped in a 360, but I have got way to much into it to swapp it out. You live and learn from your mistakes. Dont get me wrong.. I feel that I didnt make a mistake on the intake and headers, and all the other stuff. It was learning part that I enjoyed...plus SMOKIN' a V-8 car once in awhile didnt hurt either. People hear it..and think its a V-8, they see it haulin' they think its a V-8, pop the hood....and people go...W.T.F.?????? LOL!! Bill Id. From: "Charles Burch" <warlocke@xxxxxxxxx> Reply-To: BaadAssGremlins@xxxxxxxxxxxxxxx To: <BaadAssGremlins@xxxxxxxxxxxxxxx> Subject: Re: [BaadAssGremlins] Question about headers for 258 Date: Thu, 30 Mar 2006 22:56:19 -0600 lol beat me to it bill, ----- Original Message ----- From: William Renshaw To: BaadAssGremlins@xxxxxxxxxxxxxxx Sent: Thursday, March 30, 2006 10:53 PM Subject: RE: [BaadAssGremlins] Question about headers for 258 ROOKIE, try www.cliffordperformance.net Be prepaired to be surprised about the cost of the stuff. But its good stuff. I still have the same header on mine for about....been so long I cant remember now....dont oooo and aaaahhh to much! LOL! Bill Id. From: "Bryan Wilson" <rookie9621@xxxxxxxxx> Reply-To: BaadAssGremlins@xxxxxxxxxxxxxxx To: BaadAssGremlins@xxxxxxxxxxxxxxx Subject: [BaadAssGremlins] Question about headers for 258 Date: Fri, 31 Mar 2006 04:05:51 -0000 Hello all I have a question about headers for my 258 inline six motor,in my 79 spirit. What is the company that sells them and what is there website? I know there is a website I just don't remeber what it is. Any help ? Thanks Rookie SPONSORED LINKS Automotive maintenance Automotive radiators YAHOO! GROUPS LINKS Visit your group "BaadAssGremlins" on the web. To unsubscribe from this group, send an email to: BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. YAHOO! GROUPS LINKS Visit your group "BaadAssGremlins" on the web. To unsubscribe from this group, send an email to: BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. YAHOO! GROUPS LINKS Visit your group "BaadAssGremlins" on the web. To unsubscribe from this group, send an email to: BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. YAHOO! GROUPS LINKS Visit your group "BaadAssGremlins" on the web. To unsubscribe from this group, send an email to: BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

YAHOO! GROUPS LINKS

Visit your group "BaadAssGremlins" on the web.
To unsubscribe from this group, send an email to: BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.