Re: [BaadAssGremlins] Found the last one.......
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [BaadAssGremlins] Found the last one.......

Thanks Doc, your a GENIUS!! You can trust me on one thing I will get all that I can off of the car before they crush it. And eventually they will. I knew that they had one, but I never really "looked" at it. I guess a person never really looks at things untill its needed. I plan on going back up there this morning to get the rest of the dash parts. Its totally unmolested, looks just like it did when it came of the assembly line. I will get those fenders thats a good idea, ya never know when a really-really-really-really old person is going to pull out in front of ya. Especially in the town I live in. Bout drives a man to drinkin'! Bill Id.

From: AMC74HORNET@xxxxxxxxx
Reply-To: BaadAssGremlins@xxxxxxxxxxxxxxx
To: BaadAssGremlins@xxxxxxxxxxxxxxx
Subject: Re: [BaadAssGremlins] Found the last one.......
Date: Wed, 15 Mar 2006 06:23:12 -0500

Bill on the headlight switch there is a spring loaded button on the side
of it. Hold the button in and pull on the knob. The knob and shaft will
come out in one piece. Then with a straight slot screw driver remove the
screw. On the wiper switch there is a little clip. Push it towards the
knob and the knob will pop off. Unfortunately the shaft is not
removable and you will need a small straight slot screw driver to get
the nut off. Bill you sure lucked out on getting all those parts so
cheap. Take Eddie's advice get any sheet metal parts you may need in the
future as they may be almost impossible to find in the future. I did and
I now have extra fenders, doors, a hood, bumpers, a grill, tail lights
with bezel and a ton of small parts. An un-butchered radio surround is
like gold. Most were butchered to put in aftermarket radios. The reason
I went for all the sheet metal parts is I have 2 of the same car. My son
asked why I bought all the extra parts that I really don't need at this
time. I may need then in the future and all I have to do is look in my
garage for them. :-)
"Doc"



SPONSORED LINKS
Automotive maintenance Automotive radiators

YAHOO! GROUPS LINKS




From: "William Renshaw" <lionwren@xxxxxxxxxxx>
Reply-To: BaadAssGremlins@xxxxxxxxxxxxxxx
To: BaadAssGremlins@xxxxxxxxxxxxxxx
Subject: Re: [BaadAssGremlins] Found the last one.......
Date: Tue, 14 Mar 2006 19:43:10 -0800

Thanks Doc! I did find a good Hornet today and I got a bunch of parts off of it!! Its a 4 door SST, 1972, 258 inline and I have a good question for ya. I found the original AM radio and its got a spiders nest in the face of it. HOW IN THE HELL DO I GET IT OUT??? LOL!! I guess I could take it to a shop and have them tear into it and clean it up, but that costs money and I know those guys arent cheap. I guess I could try to clean it out, but thats like trying to send me to mars in a home made rocket ship! I'd be kind of lost in space. LOL!  I also got the whole dash part that holds the speedo and gauges. I need to use the windshield wiper switch and I need to figure out how to get the knobs off so I can take off the main part of the dash. I got a complete set of hub caps, all four in excellent shape. Are the hub caps stainless steel? They did clean up really nice, but the paint that goes in the indentations on the outside of the cap is gone. Easy fix there. I also got a bunch of small parts and I am going up to get the rest of the dash here in the next couple of days. I will need it for my Gremlin. If your in need of any parts let me know and I will see if there is what ya need. What I dont need or want your open for them. Anyone here is open to them as far as that goes. The car only had 59,000 original miles on it. The auto tranny is still in it also. I even got the turn signal lamps off of the grille. It had been sitting in the back window for god knows how long and being a 72 its plastic, and it just fell apart! I could not believe how brittle that gille was. Its got some good fenders also. The headlight buckets where shot all to hell which was kind of a bummer. I am in need of one. You are right about the getting lucky Doc and I am willing to share the wealth with anyone here. Bill Id. OH YA! All the parts I got today cost me a whole 20 bucks! Its mouse free also. :)=

From: AMC74HORNET@xxxxxxxxx
Reply-To: BaadAssGremlins@xxxxxxxxxxxxxxx
To: BaadAssGremlins@xxxxxxxxxxxxxxx
Subject: Re: [BaadAssGremlins] Found the last one.......
Date: Tue, 14 Mar 2006 17:56:05 -0500

Nice find Bill on the tail light lenses. A lot of that old stuff is
still around in old AMC dealers that don't even know they have it and
are glad to get rid of it for a fair price. You just have to get lucky
at times.
"Doc"



SPONSORED LINKS
Automotive maintenance Automotive radiators

YAHOO! GROUPS LINKS




From: "Bill Renshaw" <lionwren@xxxxxxxxxxx>
Reply-To: BaadAssGremlins@xxxxxxxxxxxxxxx
To: BaadAssGremlins@xxxxxxxxxxxxxxx
Subject: [BaadAssGremlins] Found the last one.......
Date: Tue, 14 Mar 2006 13:52:16 -0000

I think anyway... I called my local AMC dealer. LOL!! They now sell
Subarus and I think Jeeps. I called for kicks a giggles to see if they
could locate a pair of N.O.S. tail lights for my newly aquired 70
Hornet. Low and behold, "ROLL ME IN SHEEP DIP AND COVER ME WITH BLOW
FLIES"!! The parts guy "found" ONE right side tail light, and a hole
butt load of left ones. At 41 bucks apiece I thought wasnt bad
considering the price for one on EVILBAY! Headed up today to "look" at
an old Hornet. I am in need of some parts, well, not me.... the car
is!   
RAPE AND PILLAGE HE-HE!! (long evil laugh!) Bill Id.







YAHOO! GROUPS LINKS



Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated